Layered dry envelope insulated with sheep wool-lime mix

This poster describes the results of a research aimed to design and assess a new layered envelope component that might be implemented on buildings of the Mediterranean area, in order to improve the energy efficiency and the environmental sustainability. These goals have been achieved by means of the use of local and natural building materials or arising from renewable resources. In particular, thermal insulating has been realize utilizing a mix of natural and mineral materials, obtaining a biocomposite with comparable building physics and mechanical properties to commonly used building materials. Among natural materials, the sheep wool was chosen since it is, on the hand, a waste to exploit and, on the other hand, it has a good behavior towards heat, moisture and indoor air pollution. Several sample have been realized mixing sheep wool, at different granulometry, with lime in different weight percentages. For each sample, thermal tests have been performed by means of a heat flow meter. The U value, Yie, mass and time lag have been evaluated for the whole designed system according to the Italian standards. In order to compare the environmental impact of the designed system with a similar commercial product, a Life Cycle Assessment has been carried out. Finally, thermal performance of the envelope system was evaluated by simulating its use in the retrofit of the old structure of a factory both in wall and in floor elements. The results was good in terms of energy balances of the building, while LCA results are contradictory, being one of the main issue the lack of data for local materials not directly investigated by authors