A novel process to prepare high-purity vanadyl sulfate electrolyte from leach liquor of sodium-roasted vanadium slag

The leach liquor of sodium-roasted vanadium slag in vanadium industry is an alkaline solution containing vanadium, sodium, chromium, and other impurities, and preparing high-purity vanadyl sulfate electrolyte (used in vanadium redox flow battery) directly from this solution is challenging but cost-effective. A novel process consisting of selective reduction-precipitation of chromium and solvent extraction of vanadium was proposed and optimized in this study. Approximately 90% of Cr(VI) in the solution was reduced to Cr(III) and precipitated after adding sodium sulfite at a pH of 5.77 and 25?, while V(V) remained in this process and needed a further reduction to V(IV) prior to extraction. More than 99.9% of V(IV) remained in the solution was extracted by two stage extraction using the "P507 + TBP + kerosene " extractant system at a pH of 2.00 and an organic-to-aqueous phase ratio of 1.5:1. Sodium entrained in the organic phase was washed off through three-stage scrubbing. A high-purity vanadyl sulfate solution of 2.1 mol L-1 was prepared by two-stage stripping using 5.5 mol L-1 sulfuric acid. According to the slope analysis and infrared spectra, the extraction of V(IV) by P507 follow the cation exchange mechanism. This study provides a feasible way to remove chromium and recover vanadium in the form of vanadyl sulfate from the industrial leach liquor of sodium-roasted vanadium slag