Improving the technological process of mechanical processing of the flange 746.647.008

В кваліфікаційній роботі вдосконалено технологію виготовлення деталі фланць 746.647.008. В роботі розроблено питання аналізу виробу, його призначення, характеристика можливого варіанту виробництва, аналіз застосування технічних засобів. Також проведено попереднє встановлення типу виробництва відносно заданої програми, запропоновано варіанти можливого технологічного процесу, розроблено оптимальний технологічний процес на базі аналізу технологічних властивостей і базових можливостей деталі.In the qualification work, the manufacturing technology of the 746.647.008 flange part was improved. The work deals with the analysis of the product, its purpose, the characteristics of a possible production option, and the analysis of the use of technical means. A preliminary determination of the type of production in relation to the given program was also carried out, options for a possible technological process were proposed, an optimal technological process was developed based on the analysis of the technological properties and basic capabilities of the part.Introduction 1 General technical part 1.1. Official purpose of the part 1.2. Analysis of technical requirements of the part 1.3. Analysis of the manufacturability of the design of the part 1.4. Analysis of the basic technological process 1.5. Conclusions and tasks for the qualification work 2 Technological part 2.1. Determining the type of production 2.2. Choosing the method of obtaining the workpiece 2.3. Choice of technological bases 2.4. Design of technological route of machining details 2.5. Determination of allowances for processing 2.6 Calculation and selection of processing modes and technical time norms 3 Design part 3.1. Description of the design of the device for machining 3.2.Calculation of the drive error 3.3. Calculation of the drive of the device 4. Life safety, basics of labor protection 4.1. Development of measures to reduce noise at the site 4.2. Measures for fire safety of the projected area Conclusions Reference