Add to ORKGThe microstructure and mechanical properties of high strength low-carbon steel, an austenitic stainless steel and the bimetallic semi-product produced from these steels were investigated. Two steels, an S700MC-type high strength low-carbon steel and a 316L-type austenitic stainless steel, were used as the layer materials for bimetallic semi-product, which was produced by electro-slag claddin
The hot stamping potential of three commercial carbon–manganese–chromium steels was demonstrated. Th...
Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher deposi...
In view of the significant advantages offered by semi-solid processing, such as reduction in number ...
© 2015, Springer-Verlag London. Bimetal consisting of high-carbon steel and low-carbon steel was pre...
Steel is one of the engineering materials for automobile industries. It constitutes about 60% of the...
An experimental investigation on material properties of double-sided stainless-clad bimetallic steel...
There the paper purpose is to study the opportunity for creation of low-alloyed high-speed steel of ...
Mechanical properties of Q370qE carbon steel can be improved by cladding it with 316L stainless stee...
Metal powder 3D printing technology is gaining popularity due to the possibility of producing struct...
In recent decades, some new classes of metallic and composition materials have been developed, which...
A high carbon steel (HCS) and low carbon steel (LCS) bimetal was fabricated by centrifugal composite...
The thesis is focused on high-alloy austenitic and austenitic-ferritic (duplex) steel. The theoretic...
Concepts of Fe-Al-Mn-C-based lightweight steels are fairly simple, but primary metallurgical issues ...
Diagrams of supercooled austenite decomposition are constructed for new steels of the Kh2G2C2MF allo...
This book gathers a collection of papers summarizing some of the latest developments in the thermome...
The hot stamping potential of three commercial carbon–manganese–chromium steels was demonstrated. Th...
Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher deposi...
In view of the significant advantages offered by semi-solid processing, such as reduction in number ...
© 2015, Springer-Verlag London. Bimetal consisting of high-carbon steel and low-carbon steel was pre...
Steel is one of the engineering materials for automobile industries. It constitutes about 60% of the...
An experimental investigation on material properties of double-sided stainless-clad bimetallic steel...
There the paper purpose is to study the opportunity for creation of low-alloyed high-speed steel of ...
Mechanical properties of Q370qE carbon steel can be improved by cladding it with 316L stainless stee...
Metal powder 3D printing technology is gaining popularity due to the possibility of producing struct...
In recent decades, some new classes of metallic and composition materials have been developed, which...
A high carbon steel (HCS) and low carbon steel (LCS) bimetal was fabricated by centrifugal composite...
The thesis is focused on high-alloy austenitic and austenitic-ferritic (duplex) steel. The theoretic...
Concepts of Fe-Al-Mn-C-based lightweight steels are fairly simple, but primary metallurgical issues ...
Diagrams of supercooled austenite decomposition are constructed for new steels of the Kh2G2C2MF allo...
This book gathers a collection of papers summarizing some of the latest developments in the thermome...
The hot stamping potential of three commercial carbon–manganese–chromium steels was demonstrated. Th...
Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher deposi...
In view of the significant advantages offered by semi-solid processing, such as reduction in number ...