CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates in galvano statics mode by using an aqueous acidic bath containing CdSO4 and SeO2 in optimized proportion. The growth progress of the film was studied. The deposition parameters such as concentration of electrolyte, time of deposition of film, current density and pH of electrolyte are optimized. The analysis of such deposited filmwas done with electron dispersive spectra (EDS) and X-ray Diffraction (XRD), showed presence of polycrystalline nature of the deposited film.The Scanning Electron Microscope (SEM) gives the surface morphology of the deposited filmsand is observed well adherent and grains are uniformly distributed over the surface of...
In this paper we report the results on pulse electrodeposited cadmium selenide thin films using micr...
Thin films of cadmium selenide (CdSe) have been deposited on fluorine-doped tin oxide (FTO)-coated g...
CdSe films have been pulse electrodeposited on evaporated gold substrates with different duty cycle...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
Cadmium selenide (CdSe) thin films have been successfully prepared by the electrodeposition techniqu...
Cadmium selenide (CdSe) thin films have been successfully prepared by the electrodeposition techniqu...
Cadmium selenide thin films were electrodeposited on the indium tin oxide (ITO)conducting glass subs...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
CdSe thin films were pulse electrodeposited at room temperature and at different duty cycles in the ...
CdSe films were electrodeposited on pure nickel substrates. The nickel substrate was polished to a m...
CdSe films were electrodeposited on pure nickel substrates. The nickel substrate was polished to a m...
In this paper we report the results on pulse electrodeposited cadmium selenide thin films using micr...
Thin films of cadmium selenide (CdSe) have been deposited on fluorine-doped tin oxide (FTO)-coated g...
CdSe films have been pulse electrodeposited on evaporated gold substrates with different duty cycle...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
CdSe thin films were deposited by pulsed electrodeposition technique onto stainless steel substrates...
Cadmium selenide (CdSe) thin films have been successfully prepared by the electrodeposition techniqu...
Cadmium selenide (CdSe) thin films have been successfully prepared by the electrodeposition techniqu...
Cadmium selenide thin films were electrodeposited on the indium tin oxide (ITO)conducting glass subs...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
Cadmium selenide thin films with different pH values (pH = 10, 11, 12 and 13) are produced on glass ...
CdSe thin films were pulse electrodeposited at room temperature and at different duty cycles in the ...
CdSe films were electrodeposited on pure nickel substrates. The nickel substrate was polished to a m...
CdSe films were electrodeposited on pure nickel substrates. The nickel substrate was polished to a m...
In this paper we report the results on pulse electrodeposited cadmium selenide thin films using micr...
Thin films of cadmium selenide (CdSe) have been deposited on fluorine-doped tin oxide (FTO)-coated g...
CdSe films have been pulse electrodeposited on evaporated gold substrates with different duty cycle...