Studies on chemical and physical properties, and reduction behaviour (in coal) of hematite iron ores, procured from ten different mines of Orissa, were undertaken to provide information to the iron and steel industries (sponge iron plants in particular). Majority of the iron ores were found to have high iron and low alumina and silica contents. All these iron ores were free from the deleterious elements (S, P, As, Pb, alkalies, etc.). The results indicated lower values of shatter and abrasion indices, and higher values of tumbler index in all the iron ore lumps except Serazuddin (previous) and Khanda Bandha OMC Ltd.. For all the fired iron ore pellets, the degree of reduction in coal was more intense in the first 30 minutes after which it b...
The increasing trend in the prices of steel scrap and its short supply led the steel technologists t...
The reduction characteristics of Lampung (Sumatra) lump ore uses carbon monoxide have been studied b...
In the iron production processes, sinters and pellets are mostly used as raw materials due to their ...
Studies on chemical and physical properties, and reduction behaviour (in coal) of hematite iron ores...
Studies on the reduction behavior of hematite iron ore (OMC Ltd.) lumps with coal at different tempe...
Due to low availability of coking coal and huge establishment cost of Blast Furnace plants, the pred...
Keeping in mind, during the course of mining, a large amount of iron and coal fines are generated, a...
Demand of sponge iron and pre-reduced pellets for the manufacture of different varieties of steel is...
Demand of sponge iron and pre-reduced pellets for the manufacture of different varieties of steel is...
In view of generation of huge amount of iron ore and coal fines there is a need to develop a techniq...
In the present investigation , an attempt has been made to study the effect of coal char reactivity ...
Low grade iron ore sample obtained from Kuala Lipis, Pahang, Malaysia have been used throughout this...
Reduction of Iron Ore Pellets with a particular percentage of binders i.e. 2% of Dextrine and 2% of ...
Reduction of Iron Ore Pellets with a particular percentage of binders i.e. 2% of Dextrine and 2% of ...
As well known that the Iron and Steel Industry has been priority policy by the Indonesian government...
The increasing trend in the prices of steel scrap and its short supply led the steel technologists t...
The reduction characteristics of Lampung (Sumatra) lump ore uses carbon monoxide have been studied b...
In the iron production processes, sinters and pellets are mostly used as raw materials due to their ...
Studies on chemical and physical properties, and reduction behaviour (in coal) of hematite iron ores...
Studies on the reduction behavior of hematite iron ore (OMC Ltd.) lumps with coal at different tempe...
Due to low availability of coking coal and huge establishment cost of Blast Furnace plants, the pred...
Keeping in mind, during the course of mining, a large amount of iron and coal fines are generated, a...
Demand of sponge iron and pre-reduced pellets for the manufacture of different varieties of steel is...
Demand of sponge iron and pre-reduced pellets for the manufacture of different varieties of steel is...
In view of generation of huge amount of iron ore and coal fines there is a need to develop a techniq...
In the present investigation , an attempt has been made to study the effect of coal char reactivity ...
Low grade iron ore sample obtained from Kuala Lipis, Pahang, Malaysia have been used throughout this...
Reduction of Iron Ore Pellets with a particular percentage of binders i.e. 2% of Dextrine and 2% of ...
Reduction of Iron Ore Pellets with a particular percentage of binders i.e. 2% of Dextrine and 2% of ...
As well known that the Iron and Steel Industry has been priority policy by the Indonesian government...
The increasing trend in the prices of steel scrap and its short supply led the steel technologists t...
The reduction characteristics of Lampung (Sumatra) lump ore uses carbon monoxide have been studied b...
In the iron production processes, sinters and pellets are mostly used as raw materials due to their ...