A comparative study of effects on characteristic properties of FRP composites when exposed to Distilled water, NaCl- water solution and sea water separately was done.Composite of E- glass fiber reinforced in epoxy resin (araldite LY556) in 40:60 weight ratios was used. Samples were immersed for 2, 4, and 8 days in the three mediums separately at 60°C and 95% humidity in a humid chamber. ILSS values were calculated using INSTRON 1195. It was found that all solutions marginally degraded the mechanical property this was mainly the result of polymer hydrolysis. The diffusivity was found to be maximum in case of 3.2% NaCl solution and minimum in sea water. The immersion in sea water had least affect on mechanical properties. As evidenced by SEM ...
Diffusion of linear and cyclic poly(oxyethylene) (POE) oligomers in poly(methyl methacrylate) (PMMA)...
Currently, one-dimensional (1-D) nanostructures have drawn much interest because of their potential ...
The conventional materials are nowadays not sufficient to cater to the variety of uses and exposure ...
Fiber reinforced polymer (FRP) composites have a huge demand for applications in diversified fields ...
It is well known that the high-performance properties of glass-fiber-reinforced polymer composite ma...
Thirty-six FRP composite welds were wetted with UV curing vinyl ester resin and used to join fibergl...
The food packaging initially born as a "container" of food for the sale of quantities defined in ade...
Segmented polyurethaneureas (SPUU) are thermoplastic elastomers with excellent elastic properties, h...
Tesfai, Aaron, B.S., B.A., University of Missouri, Columbia, 2003 Doctor of Philosophy, Spring Comme...
In last years, there has been a growing interest in the effect of reducing salinity of injected wate...
Soft matter is a subfield of condensed matter including polymers, colloidal dispersions, surfactants...
The objective of this study was to quantitatively measure the stress state present at the interactio...
Given the great discord concerning the mechanisms that govern shear failure, the shear behaviour of ...
A mechanical face seal is an important component of variety of pumps used in chemical, petrochemical...
Much of the research on wettability in the existing literature has been done using stocktank oils an...
Diffusion of linear and cyclic poly(oxyethylene) (POE) oligomers in poly(methyl methacrylate) (PMMA)...
Currently, one-dimensional (1-D) nanostructures have drawn much interest because of their potential ...
The conventional materials are nowadays not sufficient to cater to the variety of uses and exposure ...
Fiber reinforced polymer (FRP) composites have a huge demand for applications in diversified fields ...
It is well known that the high-performance properties of glass-fiber-reinforced polymer composite ma...
Thirty-six FRP composite welds were wetted with UV curing vinyl ester resin and used to join fibergl...
The food packaging initially born as a "container" of food for the sale of quantities defined in ade...
Segmented polyurethaneureas (SPUU) are thermoplastic elastomers with excellent elastic properties, h...
Tesfai, Aaron, B.S., B.A., University of Missouri, Columbia, 2003 Doctor of Philosophy, Spring Comme...
In last years, there has been a growing interest in the effect of reducing salinity of injected wate...
Soft matter is a subfield of condensed matter including polymers, colloidal dispersions, surfactants...
The objective of this study was to quantitatively measure the stress state present at the interactio...
Given the great discord concerning the mechanisms that govern shear failure, the shear behaviour of ...
A mechanical face seal is an important component of variety of pumps used in chemical, petrochemical...
Much of the research on wettability in the existing literature has been done using stocktank oils an...
Diffusion of linear and cyclic poly(oxyethylene) (POE) oligomers in poly(methyl methacrylate) (PMMA)...
Currently, one-dimensional (1-D) nanostructures have drawn much interest because of their potential ...
The conventional materials are nowadays not sufficient to cater to the variety of uses and exposure ...