Objective. The aim of this study was to microstructurally characterize and to make comparisons of the physical properties of sintered dental porcelains prepared by mixing with distilled water and with their modeling liquid. Methods. Six commercial porcelain powders: IPS Classic (Ivoclar Vivadent AG, Schaan, Liechtenstein), IPS d.SIGN (Ivoclar Vivadent AG), IPS InLine (Ivoclar Vivadent AG), Vita VMK95 (Vita Zahnfabrk, Bad Sackingen, Germany), Vita OMEGA 900 (Vita) and Ceramco III (Ceramco-Dentsply, Burlington, NJ, USA) were used as starting powders. Following particle size and BET analyses of starting powders, each porcelain powder was mixed with distilled water and with its own modeling liquid. Disc specimens were sintered in accordance wit...
Objectives. To evaluate the effect of pH of storage medium on slow crack growth (SCG) parameters of ...
The resistance of material to crack propagation is defined as fracture toughness (K ) and is one mea...
A vitreous porcelain body was fabricated by a conventional sintering and spark plasma sintering (SPS...
In this study, samples of dental porcelain bodies have been made by using the materials collected fr...
Purpose: The objective of this study was to verify the influence of test environment on the flexural...
Chipping remains a big challenge during the clinical application of glass ceramics in dentistry. The...
One-step and incremental mixing procedures are currently used to produce dental ceramic pastes. In t...
The conventional method of producing porcelain standard disc specimens is based on the dental lab me...
Statement of problem. One-step and incremental mixing procedures are currently used to produce denta...
In this study, we measured the mechanical strength and fracture toughness of feldspathic dental porc...
Abstract Four dental porcelains for covering zirconia were sintered (fired) at 910-960 °C and charac...
The aim of this work was to determine the effect of temperature and heating rate on the densificatio...
The aim of this study was to evaluate the evolution of mechanical properties and chemical variation ...
AbstractThe aim of this work was to determine the effect of temperature and heating rate on the dens...
The purpose of the study was to verify the effects of a number of materials' parameters (crystalline...
Objectives. To evaluate the effect of pH of storage medium on slow crack growth (SCG) parameters of ...
The resistance of material to crack propagation is defined as fracture toughness (K ) and is one mea...
A vitreous porcelain body was fabricated by a conventional sintering and spark plasma sintering (SPS...
In this study, samples of dental porcelain bodies have been made by using the materials collected fr...
Purpose: The objective of this study was to verify the influence of test environment on the flexural...
Chipping remains a big challenge during the clinical application of glass ceramics in dentistry. The...
One-step and incremental mixing procedures are currently used to produce dental ceramic pastes. In t...
The conventional method of producing porcelain standard disc specimens is based on the dental lab me...
Statement of problem. One-step and incremental mixing procedures are currently used to produce denta...
In this study, we measured the mechanical strength and fracture toughness of feldspathic dental porc...
Abstract Four dental porcelains for covering zirconia were sintered (fired) at 910-960 °C and charac...
The aim of this work was to determine the effect of temperature and heating rate on the densificatio...
The aim of this study was to evaluate the evolution of mechanical properties and chemical variation ...
AbstractThe aim of this work was to determine the effect of temperature and heating rate on the dens...
The purpose of the study was to verify the effects of a number of materials' parameters (crystalline...
Objectives. To evaluate the effect of pH of storage medium on slow crack growth (SCG) parameters of ...
The resistance of material to crack propagation is defined as fracture toughness (K ) and is one mea...
A vitreous porcelain body was fabricated by a conventional sintering and spark plasma sintering (SPS...