Area-Power Analysis of FFT Based Digital Beamforming for GEO, MEO, and LEO Scenarios

Satellite communication systems can provide seamless wireless coverage directly or through complementary ground terrestrial components and are projected to be incorporated into future wireless networks, particularly 5G and beyond networks. Increased capacity and flexibility in telecom satellite payloads based on classic radio frequency technology have traditionally translated into increased power consumption and dissipation. Much of the analog hardware in a satellite communications payload can be replaced with highly integrated digital components that are often smaller, lighter, and less expensive, as well as software reprogrammable. Digital beamforming of thousands of beams simultaneously is not practical due to the limited power available onboard satellite processors. Reduced digital beamforming power consumption would enable the deployment of a full digital payload, resulting in comprehensive user applications. Beamforming can be implemented using matrix multiplication, hybrid methodology, or a discrete Fourier transform (DFT). Implementing DFT via fast Fourier transform (FFT) reduces the power consumption, process time, hardware requirements, and chip area. Therefore, in this paper, area-power efficient FFT architectures for digital beamforming are analyzed. The area in terms of look up tables (LUTs) is estimated and compared among conventional FFT, fully unrolled FFT, and a 4-bit quantized twiddle factor (TF) FFT. Further, for the typical satellite scenarios, area, and power estimation are reported