Ignition delay is a vital combustion characteristic of any fuel that directly affects the development of internal combustion engines (ICEs) and exhaust emissions, especially in diesel engines. Considering the global interest in alternative fuels, GTL (Gas to Liquid) can be considered one of the promising new alternative fuels, especially for compression Ignition engines (CIE). In this dissertation, an investigation of this property experimentally for different types of heavy hydrocarbon fuels such as diesel, GTL, GTL/diesel blends, and GTL/biodiesel blends under a wide range of operation conditions like initial pressure, initial temperature and equivalence ratio; starting from a deep survey of the previous studies. The shock tube facility i...
This paper presents experimental and modeling data for the autoignition of a novel, six-component, h...
Glycerol is a major by-product of biodiesel production. Per one tone of produced biodiesel, one hund...
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbo...
The ignition delay in a diesel engine is defined as the time interval between the start of injection...
Multicomponent fuels, such as kerosene and diesel fuel, are the primary source of energy powering th...
The global depletion of petroleum-based fuels has led the world to more closely examine alternate fu...
Ignition delay times were measured for gas-phase jet fuel (Jet-A), rocket propellant (RP-1), and die...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Single pulse shock tube facility has been developed in the High Temperature Chemical Kinetics Lab, A...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbo...
This paper presents experimental and modeling data for the autoignition of a novel, six-component, h...
Glycerol is a major by-product of biodiesel production. Per one tone of produced biodiesel, one hund...
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbo...
The ignition delay in a diesel engine is defined as the time interval between the start of injection...
Multicomponent fuels, such as kerosene and diesel fuel, are the primary source of energy powering th...
The global depletion of petroleum-based fuels has led the world to more closely examine alternate fu...
Ignition delay times were measured for gas-phase jet fuel (Jet-A), rocket propellant (RP-1), and die...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Single pulse shock tube facility has been developed in the High Temperature Chemical Kinetics Lab, A...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to...
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbo...
This paper presents experimental and modeling data for the autoignition of a novel, six-component, h...
Glycerol is a major by-product of biodiesel production. Per one tone of produced biodiesel, one hund...
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbo...