The influence of Variable Geometry Control on a R290 Ejector Refrigeration System

The large-scale deployment of ejector refrigeration systems (i.e., solar-based ejector refrigeration systems), although representing a promising alternative compared with mechanical compressor ones, is hindered due to limitations regarding ejector control modes. Indeed, ejectors are fluid-dynamics controlled devices and, because of their fixed geometry, they operate at their highest efficiency in a narrow range of operating conditions, which is in contrast with the dynamic pressure and temperature levels characterizing real applications. In this context, variable geometry ejectors (VGE) represent a promising solution to increase the flexibility and operation range of this component. The present study aims to extend the present body of knowledge regarding VGE systems, evaluating the impact of a spindle-provided ejector operated with R290 on the performance of the refrigeration system. The analysis has been carried out using an integrated lumped parameter/CFD approach, thus linking the local flow properties and global performances. Different spindle positions have been tested to assess how the different nozzle area ratios affect both the entrainment ratio and the critical pressure. Results showed that increasing primary nozzle area ratio the system can effectively reduce the thermal input, increasing the average COP at the expanse of a lower critical pressure. In conclusion, using a moving spindle control system might ensure an improvement of the ejector performance