High Efficiency Two Stage Microwave GaN Power Amplifier with Gate Source Waveform Shaping of the Power Stage

International audienceThis paper presents a technique to improve the power added efficiency (PAE) of GaN power amplifiers by an appropriate shaping of the gate source voltage waveform. The proposed technique is based on second harmonic injection at the transistor input. It is applied here to a 15W GaN HEMT die from Cree that has been characterized using an harmonic load pull test bench at L-band. The work reported here focuses on experimental gate-source voltage waveform shaping and its impact on PAE performances. An original aspect concerns calibrated time domain waveform measurements and shaping that are performed and investigated simultaneously at both input and output ports of the transistor under test close to intrinsic accesses. Measurement results performed at 2GHz validate optimized operating conditions derived from theoretical analysis and circuit simulations. For a fixed input bias voltage (close to pinch off voltage in our case), significant efficiency improvements are obtained when the positive half wave of the gate-source voltage is sharpened. Best and worst cases are examined respectively and show 25 point PAE difference at saturated power