Aluminum oxide nucleation in the early stages of atomic layer deposition on epitaxial graphene

The nucleation and growth mechanism of aluminum oxide (Al2O3) in the early stages of atomic layer deposition (ALD) on monolayer epitaxial graphene (EG) on silicon carbide (4H-SiC) has been investigated by atomic force microscopy (AFM), conductive-atomic force microscopy (C-AFM) and Raman spectroscopy. Differently than for other types of graphene, a large and uniform density of nucleation sites was observed in the case of EG and ascribed to the presence of the buffer layer at EG/SiC interface. The deposition process was characterized by Al2O3 island growth in the very early stages, followed by the formation of a continuous Al2O3 film (similar to 2.4 nm thick) after only 40 ALD cycles due to the islands coalescence, and subsequent layer-by-layer growth. The electrical insulating properties of the deposited ultrathin Al2O3 films were demonstrated by nanoscale current mapping with C-AFM. Raman spectroscopy analyses showed low impact of the ALD process on the defects density of EG. The EG strain was also almost unaffected by the deposition in the regime of island growth and coalescence, whereas a significant increase was observed after the formation of a compact Al2O3 film. The obtained results can have important implications for device applications of epitaxial graphene requiring ultra-thin high-k insulators. (C) 2020 Elsevier Ltd. All rights reserved.Funding Agencies|MIURMinistry of Education, Universities and Research (MIUR); SSF project [GMT14-0077]; VRSwedish Research Council [2018-04962]