Comparison of macrosynthetic and steel FRC shear-critical beams with similar residual flexure tensile strengths

[EN] This study extends previous experimental research on the shear behaviour of macrosynthetic fibre-reinforced concrete beams and compares them to steel fibre-reinforced concrete beams with similar mechanical and geometrical properties. This work employed two fibre types: 60/0.9 (long/diameter) double hooked-end steel fibre and 60/85 monofilament polypropylene fibre. Beams were tested by shear loading covering parameters, such as two different cross-section widths, two shear-span-to-effective-depth ratios, two fibre types and using repetitions with and without transverse reinforcement. For quantitative comparison purposes, crack pattern evolution was studied along increasing loads levels. Effects were studied by photogrammetry, including influence of fibres on crack propagation in uncracked and dowel zones, influence of fibres on stirrup behaviour, and shear deformation or kinematics of critical shear cracks. The results evidenced similar effectiveness for both fibre types in controlling shear crack propagation and horizontal dowel cracking. Both fibres provided similar shear ductility and shear deflections. Consequently, the authors confirm that residual flexural tensile strengths are a convenient parameter for characterising the shear behaviour of fibre-reinforced concrete beams.This work forms part of Project "BIA2016-78460-C3-1-R" supported by the State Research Agency of Spain.Ortiz-Navas, F.; Navarro-Gregori, J.; Leiva, G.; Serna Ros, P. (2020). Comparison of macrosynthetic and steel FRC shear-critical beams with similar residual flexure tensile strengths. Structural Engineering and Mechanics. 76(4):491-503. https://doi.org/10.12989/sem.2020.76.4.49149150376