Add to ORKGInternational audienceThe onset of edge debonding within a bonded specimen submitted to bending is modeled with two numerical approaches: the coupled criterion and the cohesive zone model. The comparison of the results obtained with the both approaches evidences that (i) the prediction of edge debonding strongly depends on the shape of the cohesive law and (ii) the trapezoidal cohesive law is the most relevant model to predict the edge debonding as compared with the coupled criterion
This paper is focused on the analytical modeling of the interface between a rigid substrate with con...
AbstractIn this work, a cohesive zone model of fracture is employed to study debonding in plasticall...
Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models...
International audienceThe onset of edge debonding within a bonded specimen submitted to bending is m...
International audienceCohesive zone models and criteria based on finite fracture mechanics are two a...
WCCM XI, 11th World Congress on Computational Mechanics, Barcelona, Spain, 20-25 July 2014
Due to its simplicity, cohesive zone modeling is largely used for a variety of applications, includi...
Due to their simplicity, cohesive zone models (CZMs) are very attractive to describe mixed-mode fail...
This paper focuses on the prediction of edge debonding for a beam retrofitted with a Fiber-Reinforce...
In this paper a simple linear elastic fracture mechanics approach is proposed for prediction of edge...
AbstractThe cohesive zone model (CZM) has found a wide acceptance as a tool for the simulation of de...
Two cohesive-zone models, one developed by Valoroso & Champaney and the other initially proposed by ...
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is...
AbstractThe development of predictive models for plate end debonding failures in beams strengthened ...
This paper proposes an enhanced Cohesive Zone Model (CZM) for the prediction of delamination in curv...
This paper is focused on the analytical modeling of the interface between a rigid substrate with con...
AbstractIn this work, a cohesive zone model of fracture is employed to study debonding in plasticall...
Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models...
International audienceThe onset of edge debonding within a bonded specimen submitted to bending is m...
International audienceCohesive zone models and criteria based on finite fracture mechanics are two a...
WCCM XI, 11th World Congress on Computational Mechanics, Barcelona, Spain, 20-25 July 2014
Due to its simplicity, cohesive zone modeling is largely used for a variety of applications, includi...
Due to their simplicity, cohesive zone models (CZMs) are very attractive to describe mixed-mode fail...
This paper focuses on the prediction of edge debonding for a beam retrofitted with a Fiber-Reinforce...
In this paper a simple linear elastic fracture mechanics approach is proposed for prediction of edge...
AbstractThe cohesive zone model (CZM) has found a wide acceptance as a tool for the simulation of de...
Two cohesive-zone models, one developed by Valoroso & Champaney and the other initially proposed by ...
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is...
AbstractThe development of predictive models for plate end debonding failures in beams strengthened ...
This paper proposes an enhanced Cohesive Zone Model (CZM) for the prediction of delamination in curv...
This paper is focused on the analytical modeling of the interface between a rigid substrate with con...
AbstractIn this work, a cohesive zone model of fracture is employed to study debonding in plasticall...
Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models...