International audienceThe effect of nickel additions on yield stress temperature dependence as well as on deformation mechanisms was investigated for Fe–Al alloys containing 40% Al. A set of different nickel containing alloys (up to 10 at.%), B-doped or B-free, was deformed in compression up to 950 °C. Subsequent dislocation structures were examined. It was shown that the addition of nickel strongly decreases the solid state solubility of boron in FeAl (B2) alloys. On the microscopic scale, nickel was confirmed to clearly decrease the dissociation width of the 111 superdislocations. From a mechanical point of view, it was shown to induce a large and linear strengthening at low temperatures (<400 °C). Owing to that specific hardening, the yi...
Strength and deformation microstructure of B2 Fe-39 and 48%Al single crystals (composition given in ...
[[abstract]]Four alloying elements Zr, Hf, B and C added in intermetallic NiAl were found to enhance...
The objective of this research is to examine the possibility of using nickel aluminide for high temp...
International audienceThe effect of nickel additions on yield stress temperature dependence as well ...
The effects of boron additions (0 to 4000 wppm B) on the room temperature deformation behavior of Ni...
Addition of 0.5 at.% of boron into a γ-γ′ two-phase alloy greatly increases the toughness of the mat...
Composition du jury : M. C. ESNOUF Professeur, INSA Lyon Président/Rapporteur M. B. VIGUIER Maître d...
Nickel-containing ternary iron aluminides with an aluminum concentration of 45 at.% were investigate...
Examines the effect of an alloying element such as copper, iron, manganese or boron on the mechanica...
The mechanical behavior of B2FeAl alloys was studied. Stoichiometric Fe-50Al exhibits totally brittl...
The effect of boron on the strength of B2-structured FeAl is considered as a function of composition...
The aim of the work here was to understand both the yield anomaly in FeAl, which was first noted by ...
Effects of 0.5 at. 9c boron doping on Nigs Al y/f superalloys were investigated for the first !ime. ...
The influence of a boron addition (0.1 wt%) on the structural stability of high-purity nanocrystalli...
Unalloyed nickel aluminide has important applications but lacks ductility at room temperature. In th...
Strength and deformation microstructure of B2 Fe-39 and 48%Al single crystals (composition given in ...
[[abstract]]Four alloying elements Zr, Hf, B and C added in intermetallic NiAl were found to enhance...
The objective of this research is to examine the possibility of using nickel aluminide for high temp...
International audienceThe effect of nickel additions on yield stress temperature dependence as well ...
The effects of boron additions (0 to 4000 wppm B) on the room temperature deformation behavior of Ni...
Addition of 0.5 at.% of boron into a γ-γ′ two-phase alloy greatly increases the toughness of the mat...
Composition du jury : M. C. ESNOUF Professeur, INSA Lyon Président/Rapporteur M. B. VIGUIER Maître d...
Nickel-containing ternary iron aluminides with an aluminum concentration of 45 at.% were investigate...
Examines the effect of an alloying element such as copper, iron, manganese or boron on the mechanica...
The mechanical behavior of B2FeAl alloys was studied. Stoichiometric Fe-50Al exhibits totally brittl...
The effect of boron on the strength of B2-structured FeAl is considered as a function of composition...
The aim of the work here was to understand both the yield anomaly in FeAl, which was first noted by ...
Effects of 0.5 at. 9c boron doping on Nigs Al y/f superalloys were investigated for the first !ime. ...
The influence of a boron addition (0.1 wt%) on the structural stability of high-purity nanocrystalli...
Unalloyed nickel aluminide has important applications but lacks ductility at room temperature. In th...
Strength and deformation microstructure of B2 Fe-39 and 48%Al single crystals (composition given in ...
[[abstract]]Four alloying elements Zr, Hf, B and C added in intermetallic NiAl were found to enhance...
The objective of this research is to examine the possibility of using nickel aluminide for high temp...