On the Study of Pile Driving Formula Based on Blow Counts

Accuracy of predicting pile capacities by pile driving formulas have been investigated. Five test piles were driven up to a depth of about 9 m of clay deposit and the penetrations due to final blows were recorded. The pile bearing capacity of each pile was predicted using 6 different pile driving formulas and the predicted pile capacity was compared with measured pile capacity from the pull up tests. Hiley formula, Modified Engineering News Record (ENR) formula, Janbu formula, Dutch formula, Danish formula, and Gates formula were used. The performance and accuracy of each formula was evaluated and the correlation coefficient of each pile driving formula was determined for a more accurate pile capacity prediction. Methods used to evaluate the performance of each formula were; (1) the best fit line for Qp versus Qm (2) cumulative probability for Qp/Qm and (3) the arithmetic mean and standard deviation for Qp/Qm. From the study, it was found that using Dutch formula provided the most accurate pile capacity estimate compared to the other formulas with an average of 7% deviation from value obtained from the field pull up test. It was followed by the Danish formula, Janbu formula, Hiley formula, Modified ENR formula, and Gates formula. The ability to predict the accuracy of estimating pile capacity using an appropriate method is very important and valuable to contractors, developers, geotechnical engineers, and manufacturers. © 2010 Springer Science+Business Media B.V