© 2021 Elsevier Masson SASIn this study, the electrical and photo-response characteristics of the Al/(CMAT)/p-Si photodiode (the device) were reported. The photodiode properties of the device were examined under various illumination intensities at room temperature. It was observed that the prepared device has a good response to the illumination. The photoconductivity mechanism (PM) of the device at −2 V was examined and the slope of the PM was found to be 0.774. Also, the transient photocurrent-time (TPT) of the device was analyzed with the switching light on (100 mW/cm2) and switching the light off (dark). The experimental results of PM and TPT showed that the prepared device may be used in optoelectronic as well as photovoltaic applicatio...
© 2019In the present study, we investigated the electrical, optical, and photoresponse characteristi...
Abstract. We present results of electrical and photoelectrical measurements on two types of Al/porou...
Electrochemical deposition technique was used to fabricate titanium doped amorphous carbon (Ti doped...
Al/MWCNT-SiO2/p-Si device were obtained using chemical techniques and characterized using the I-V (u...
In this work, we report photodiode behavior on metal polymer semiconductor device with photopolymer ...
© 2019 Elsevier B.V. In this study, Al/p-Si (MS) type photodiodes with (%2 ZnO-doped CuO) interlayer...
In this paper, the electrical characteristics of spin-coated PCBM:ZnO interlayered Al/PCBM:ZnO/Si di...
WOS: 000458264900036…Kahramanmaras Sutcu Imam UniversityKahramanmaras Sutcu Imam University [2017/1-...
Al/AlN/p-Si diode was fabricated via thermal evaporation. The electrical properties of the structure...
GO-SiO2 composite structures were synthesized chemically and characterized by FTIR, XRD, TGA and SEM...
In this work, characteristics of silicon-based p(+) type, intrinsic (I), n(-) type (Si-PIN) photodio...
Perovskites have attracted great interest because they provide promising improvement for solar cells...
WOS: 000399709300008Au/PPy/n-Si (MPS) type Schottky barrier diodes (SBDs) were produced and their cu...
This paper discusses the photodiode capacitance dependence on imposed light and applied voltage usin...
© 2021 Elsevier B.V.In the present study, the Al/Ba2P2O7/p-Si device was fabricated using barium bas...
© 2019In the present study, we investigated the electrical, optical, and photoresponse characteristi...
Abstract. We present results of electrical and photoelectrical measurements on two types of Al/porou...
Electrochemical deposition technique was used to fabricate titanium doped amorphous carbon (Ti doped...
Al/MWCNT-SiO2/p-Si device were obtained using chemical techniques and characterized using the I-V (u...
In this work, we report photodiode behavior on metal polymer semiconductor device with photopolymer ...
© 2019 Elsevier B.V. In this study, Al/p-Si (MS) type photodiodes with (%2 ZnO-doped CuO) interlayer...
In this paper, the electrical characteristics of spin-coated PCBM:ZnO interlayered Al/PCBM:ZnO/Si di...
WOS: 000458264900036…Kahramanmaras Sutcu Imam UniversityKahramanmaras Sutcu Imam University [2017/1-...
Al/AlN/p-Si diode was fabricated via thermal evaporation. The electrical properties of the structure...
GO-SiO2 composite structures were synthesized chemically and characterized by FTIR, XRD, TGA and SEM...
In this work, characteristics of silicon-based p(+) type, intrinsic (I), n(-) type (Si-PIN) photodio...
Perovskites have attracted great interest because they provide promising improvement for solar cells...
WOS: 000399709300008Au/PPy/n-Si (MPS) type Schottky barrier diodes (SBDs) were produced and their cu...
This paper discusses the photodiode capacitance dependence on imposed light and applied voltage usin...
© 2021 Elsevier B.V.In the present study, the Al/Ba2P2O7/p-Si device was fabricated using barium bas...
© 2019In the present study, we investigated the electrical, optical, and photoresponse characteristi...
Abstract. We present results of electrical and photoelectrical measurements on two types of Al/porou...
Electrochemical deposition technique was used to fabricate titanium doped amorphous carbon (Ti doped...