Thermophysical Properties of Gmelina Arborea Biodiesel

The depletion of petroleum reserves, rising cost of conventional fuels and the ill effect of emission from the use of fossil fuel on human health and environment have driven scientific research towards the development of alternative source of fuels such as biofuel and biodiesel. Biodiesel is a fuel from a renewable sources and it has the potential of being used as an alternative to fossil diesel in compression ignition engine. Some of the challenges encountered in the use of biodiesel in compression ignition engine are its availability, use of edible oil for its production, cost of biodiesel feedstock and unfavorable properties of biodiesel such as its high viscosity. Presently, there is a search for more inedible oil seeds since the available inedible feedstock are still not enough to replace more than 20 - 25% of the total transportation fuels. The thermophysical properties of the biodiesel which vary from feedstock have a significant impact on the combustion process thereby affecting the overall engine performance and emissions. The aim of this study is to test the compatibility of biodiesel from Gmelina arborea seed oil in the compression ignition engine through its thermophysical properties. The biodiesel was produced using transesterification method and the thermophysical properties tests were carried out. The results showed that the density and viscosity of Gmelina arborea seed oil was 868.8 kg/m2 (at 27.5°C) and 1.882(mm)2/s (at 40.0°C) respectively. It also showed that the biodiesel obtained had a density and viscosity value of 821.2 kg/m3 (at 27.5°C) and 0.794 9 (mm)2/s (at 40.0°C) respectively. Comparing these results with other biodiesel, it was observed that Gmelina arborea oil has a lower viscosity and density than other biodiesel from different feedstocks; therefore it has potential to perform better in the diesel engine in comparison to other biodiesel