Study of H2S Removal Capability from Simulated Biogas by Using Waste-Derived Adsorbent Materials

Three waste-derived adsorbent materials (wood-derived biochar, sludge-derived activated carbon and activated ash) were pre-activated at the laboratory scale to apply them for the removal of H2S from a biogas stream. The H2S removal capabilities of each material were measured by a mass spectrometer, to detect the H2S concentration after the adsorption in an ambient environment. The activated ash adsorbent has the highest removal capacity at 3.22 mgH2S g−1, while wood-derived biochar has slightly lower H2S removal capability (2.2 mgH2S g−1). The physicochemical properties of pristine and spent materials were characterized by the thermogravimetric analyzer, elemental analysis, X-ray fluorescence spectroscopy and N2 adsorption and desorption. Wood-derived biochar is a highly porous material that adsorbs H2S by physical adsorption of the mesoporous structure. Activated ash is a non-porous material which adsorbs H2S by the reaction between the alkaline compositions and H2S. This study shows the great potential to apply waste-derived adsorbent materials to purify a biogas stream by removing H2S