This letter presents single-ended and differential D-band power amplifiers (PAs) in 55nm SiGe BiCMOS technology. The proposed PAs exploit the remarkable features of common-base stages for rising the power efficiency, i.e., 1) higher breakdown voltage; 2) sharp compression profile due to the enhanced linearity; and 3) supply current adapted to the signal amplitude by means of current clamping. A four-stage single-ended PA proves P1,dB = 16.8 dBm with PSAT = 17.6 dBm at 135 GHz. The PAEs at P1,dB and P1,dB-6,dB are 17.1% and 8.5%, respectively. With a differential PA, the linear output power is increased to P1,dB = 18.5 dBm with PSAT = 19.3 dBm at 135 GHz. The PAEs at P1,dB and P1,dB-6,dB are 12.6% and 6.7%, respectively. The PAs demonstrate ...
A 6-stage, 8-way combining power amplifier (PA) in a 130 nm SiGe BiCMOS technology is designed and m...
This letter describes a D-band 3-stage cascode amplifier developed using the IHP 0.13 μm SiGe BiCMOS...
This paper presents a 4-way combined G-band power amplifier (PA) fabricated with a 130-nm SiGe BiCMO...
This paper presents the design of a single-ended power amplifier (PA) based on a 130-nm SiGe BiCMOS ...
This paper proposes high-efficiency E-band power amplifiers (PAs) in SiGe-BiCMOS based on a common-b...
In this work, a D-band power amplifier with 7 dBm output at 0.14 THz is presented in a 0.13 μm SiGe:...
This work presents the design of a power amplifier (PA) with an AC-coupled common-emitter and common...
This paper presents the design of a balanced power amplifier (PA) using a 130-nm SiGe BiCMOS process...
This paper presents compact D-band amplifiers in 55 nm SiGe BiCMOS technology. Device models and des...
International audienceThis paper presents the design of a broadband power amplifier (PA) in 130 nm S...
In this paper, we reported the design of single-ended power amplifier (PA) delivering an output powe...
The never ending demand for wider bandwidth, coupled with the evolution of technology, drives the pr...
In this paper the design, analysis and implementation of a 3-stage, broadband power amplifier (BPA),...
A four-stage cascade power amplifier (PA) in 60 GHz industrial scientific medical (ISM) band is real...
A 6-stage, 8-way combining power amplifier (PA) in a 130 nm SiGe BiCMOS technology is designed and m...
This letter describes a D-band 3-stage cascode amplifier developed using the IHP 0.13 μm SiGe BiCMOS...
This paper presents a 4-way combined G-band power amplifier (PA) fabricated with a 130-nm SiGe BiCMO...
This paper presents the design of a single-ended power amplifier (PA) based on a 130-nm SiGe BiCMOS ...
This paper proposes high-efficiency E-band power amplifiers (PAs) in SiGe-BiCMOS based on a common-b...
In this work, a D-band power amplifier with 7 dBm output at 0.14 THz is presented in a 0.13 μm SiGe:...
This work presents the design of a power amplifier (PA) with an AC-coupled common-emitter and common...
This paper presents the design of a balanced power amplifier (PA) using a 130-nm SiGe BiCMOS process...
This paper presents compact D-band amplifiers in 55 nm SiGe BiCMOS technology. Device models and des...
International audienceThis paper presents the design of a broadband power amplifier (PA) in 130 nm S...
In this paper, we reported the design of single-ended power amplifier (PA) delivering an output powe...
The never ending demand for wider bandwidth, coupled with the evolution of technology, drives the pr...
In this paper the design, analysis and implementation of a 3-stage, broadband power amplifier (BPA),...
A four-stage cascade power amplifier (PA) in 60 GHz industrial scientific medical (ISM) band is real...
A 6-stage, 8-way combining power amplifier (PA) in a 130 nm SiGe BiCMOS technology is designed and m...
This letter describes a D-band 3-stage cascode amplifier developed using the IHP 0.13 μm SiGe BiCMOS...
This paper presents a 4-way combined G-band power amplifier (PA) fabricated with a 130-nm SiGe BiCMO...