Thin films of the Ti-W-O system grown by r.f. reactive sputtering from a Ti-W (10%-90% weight) target have been studied by Raman and microraman spectroscopy X-ray diffraction and scanning electron microscopy with the aim to investigate their microstructural and morphological properties. To this purpose, the kinetics of structural transformations at different temperatures (600 degrees C, and 800 degrees C) have been studied, and the effect of Ti on the WO3 lattice has been singled out. The results show that annealing at different temperatures induces a microstructural evolution from the amorphous phase of the as-deposited thin film to WO3, crystalline phases via an intermediate cubic disordered phase of WO3. The effect of Ti on this cubic ph...
Thin films of tungsten oxide were deposited onto silicon substrates using reactive rf sputtering. Th...
The present work was performed on the Ti-doping effects in a small and controlled amount into WO3 to...
The thermal stability and nanoscale structural evolution at elevated temperatures of a sputter depos...
Structural studies of tungsten-titanium oxide thin films grown on alumina substrates have been perfo...
Tungsten oxide (WO3) is important and well-studied in materials science, particularly for sensor app...
Tungsten oxide (WO3) has been a subject of high interest for its unique properties, and recently for...
Tungsten oxide (WO3) has been a subject of high interest for its unique properties, and recently for...
Structural characterization of nanosized W–Ti–O rf magnetron-sputtered films was carried out by mean...
The kinetics of phase transition and phase segregation induced by annealing temperature on Ti-W-O ga...
The kinetics of phase transitions and phase segregation induced by annealing temperature on the Ti–W...
Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with...
Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with...
Thin films of Ti–W–O were prepared from a W–Ti alloy target by rf magnetron sputtering in reactive a...
International audienceDC reactive sputtering was used to deposit titanium and tungsten-based metal/o...
WO3-TiO2 thin films were prepared by r.f. reactive sputtering from a Ti0.1---W0.9 target. Annealing ...
Thin films of tungsten oxide were deposited onto silicon substrates using reactive rf sputtering. Th...
The present work was performed on the Ti-doping effects in a small and controlled amount into WO3 to...
The thermal stability and nanoscale structural evolution at elevated temperatures of a sputter depos...
Structural studies of tungsten-titanium oxide thin films grown on alumina substrates have been perfo...
Tungsten oxide (WO3) is important and well-studied in materials science, particularly for sensor app...
Tungsten oxide (WO3) has been a subject of high interest for its unique properties, and recently for...
Tungsten oxide (WO3) has been a subject of high interest for its unique properties, and recently for...
Structural characterization of nanosized W–Ti–O rf magnetron-sputtered films was carried out by mean...
The kinetics of phase transition and phase segregation induced by annealing temperature on Ti-W-O ga...
The kinetics of phase transitions and phase segregation induced by annealing temperature on the Ti–W...
Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with...
Metal oxides like Tungsten Oxide (WO3) are well documented and characterized in the literature, with...
Thin films of Ti–W–O were prepared from a W–Ti alloy target by rf magnetron sputtering in reactive a...
International audienceDC reactive sputtering was used to deposit titanium and tungsten-based metal/o...
WO3-TiO2 thin films were prepared by r.f. reactive sputtering from a Ti0.1---W0.9 target. Annealing ...
Thin films of tungsten oxide were deposited onto silicon substrates using reactive rf sputtering. Th...
The present work was performed on the Ti-doping effects in a small and controlled amount into WO3 to...
The thermal stability and nanoscale structural evolution at elevated temperatures of a sputter depos...