The authors are grateful to the ETC for providing access to equipment for microstructural characterisation.Copyright © 2022 The Authors. Aluminium composites have been extensively developed for automotive applications due to their high specific strength. However, particle agglomeration, high porosity content, and weak reinforcement/matrix interface bond are prone to occur in the casting process. These arise during the introduction of the reinforcement, mould filling, and solidification process, especially when the particle sizes are approaching the nanoscale and are detrimental, with respect to the mechanical properties. By applying high pressure in conjunction with high cooling rates, an improved distribution of the reinforcing particles c...
Fabricating metal matrix composites with enhanced mechanical and physical properties are essentially...
In this work, A357/0.5 wt.% SiC nanocomposites were fabricated with a combination of ultrasonic proc...
Abstract: tDue to the increasing demand for lighter materials with enhanced properties, the upgrade ...
In this study, the hot extrusion process was applied to stir cast aluminum matrix–SiC composites in ...
Al-Al₂O₃ and Al-4wt%Cu-SiC metal matrix nanocomposites were studied because these materials have a p...
Particle reinforced metal matrix composites (MMCs) has emerged as one of the potential materials for...
Stir casting is an economical process for the fabrication of aluminum matrix composites. There are m...
Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer dura...
In the current exploration, the impact of the 100 to 125 micron size addition of silicon carbide (Si...
46-54Application of particulate reinforced composite is being emphasized day by day due to its modif...
SiC ceramic nanoparticles were incorporated into the A356 aluminum matrix with different composition...
A process was developed to disperse β-SiC nanoparticles (NPs), with a high propensity to agglomerate...
Aluminum alloy 2024 is the best known most widely used aircraft structural alloy. Now a days it is a...
Materials with high specific strengths as well as damage tolerance are of great importance for autom...
This thesis mainly focuses on the effect of reinforcement volume fraction on the mechanical properti...
Fabricating metal matrix composites with enhanced mechanical and physical properties are essentially...
In this work, A357/0.5 wt.% SiC nanocomposites were fabricated with a combination of ultrasonic proc...
Abstract: tDue to the increasing demand for lighter materials with enhanced properties, the upgrade ...
In this study, the hot extrusion process was applied to stir cast aluminum matrix–SiC composites in ...
Al-Al₂O₃ and Al-4wt%Cu-SiC metal matrix nanocomposites were studied because these materials have a p...
Particle reinforced metal matrix composites (MMCs) has emerged as one of the potential materials for...
Stir casting is an economical process for the fabrication of aluminum matrix composites. There are m...
Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer dura...
In the current exploration, the impact of the 100 to 125 micron size addition of silicon carbide (Si...
46-54Application of particulate reinforced composite is being emphasized day by day due to its modif...
SiC ceramic nanoparticles were incorporated into the A356 aluminum matrix with different composition...
A process was developed to disperse β-SiC nanoparticles (NPs), with a high propensity to agglomerate...
Aluminum alloy 2024 is the best known most widely used aircraft structural alloy. Now a days it is a...
Materials with high specific strengths as well as damage tolerance are of great importance for autom...
This thesis mainly focuses on the effect of reinforcement volume fraction on the mechanical properti...
Fabricating metal matrix composites with enhanced mechanical and physical properties are essentially...
In this work, A357/0.5 wt.% SiC nanocomposites were fabricated with a combination of ultrasonic proc...
Abstract: tDue to the increasing demand for lighter materials with enhanced properties, the upgrade ...