Centralized and Decentralized control of Microgrids

ABSTRACT Microgrid can be seen as an important controllable sub-system in future power systems. As a part of distribution network, the microgrid can operate in grid-connected or islanded mode to supply its local loads, and it consists of different renewable and non-renewable distribution generations that are connected to the system through power electronics (PE) interfaces. However, the control of microgrids is one of the important issues to focus on in order to overcome the challenges raised by high penetration of of renewable energy sources (RES). Depending on the responsibilities assumed by the different control levels, the microgrid can be controlled in centralized or decentralized modes. In centralized approach, the microgrid central controller (MGCC) is mainly responsible for the maximization of the microgrid value and optinization of its operation, and the MGCC determines the amount of power that the microgrid should import or export from the upstream distribution system by optimizing the local production or consumption capabilities. However, the MGCC should always consider the market prices of electricity, grid security concerns and ancillary services requested by the DSO when taking decisions. In this case an optimized operating scenario is realized by controlling the microsources and controllable loads within the microgrid, where non-critical, flexible loads can be shed, when profitable. Furthermore, the actual active and reactive power of the components are monitored. When a full decentralized control is implemented, the Management Center (MC) takes responsibilities and it competes or collaborates to optimize the production, satisfy the demand and provide the maximum possible export to the grid but all is done by considering the real time market prices. This thesis discusses the concepts of centralized and decentralized control of MG, where the main chapters introduce different control methods and PE interfaces that are involved in the microgrid control, while the final work presents simulation models that demonstrate how microgrids are controlled through inverters and the results. Using MATLAB/Simulink environment, PQ and V/f control modes of inverter are simulated and the results are discussed to point out their significant effect on balancing the voltage magnitude, maintaining the frequency and power sharing