A mm-Wave Phased-Array Fed Torus Reflector Antenna with \ub130\ub0 Scan Range for Massive-MIMO Base-Station Applications

A phased-array fed reflector antenna system is presented which can be used for mm-wave base station applications. The proposed system is designed to support massive-Multi-Input-Multi-Output (MIMO) scenarios within a wide coverage (\ub130\ub0) in the azimuth plane and a limited coverage at the elevation plane. A design and characterization methodology has been established to optimize the system for the operation in various line-of-sight conditions by adopting the maximum-ratio-transmission (MRT) and zero-forcing (ZF) MIMO algorithms. A two-user MIMO case study has been considered for the evaluation of the key system performance metrics, i.e. the effective isotropic radiated power, power consumption, signal-to-noise-ratio (SNR), and signal-to-interference-plus-noise-ratio (SINR). This study demonstrates that the phased-array fed reflector concept has a major advantage over traditional direct-radiating phased array (DRPA) antennas to reduce energy consumption. In the present example, it requires 12–14 dB less transmitted power as compared to the MRT-beamformed DRPAs for the same SNR, and 26–27 dB less transmitted power relatively to ZF-beamformed DRPA systems for the same SINR. A prototype, employing a 55 cm diameter torus reflector and operating at 28 GHz-band, has been manufactured and tested. The measurement results agree well with simulations