International audienceThe Zr(70)Ni(16)Cu(6)Al(8) bulk metallic glass (BMG) was tested in tension mode using high-speed imaging in order to monitor the viscous flow inside a sliding shear band. Assuming the shear band thickness to be 15 nm, we estimated the shear viscosity to be similar to 3.8 x 10(3) Pa s. The apparent temperature in the shear band was estimated to reach approximately 852 K on the basis of the relationship between the viscosity and the strain rate in the supercooled liquid region and was found to be considerably lower than the melting temperature (1293 K). (C) 2011 Published by Elsevier Ltd
The plastic deformation behavior and serrated flow in seven bulk metallic glass (BMG) systems were i...
International audienceIt is well known that nickel-free zirconium-based bulk metallic glasses are of...
We present a systematic investigation of shear-band dynamics as a function of chemical composition i...
Zr70Ni16Cu6Al8 bulk metallic glass samples were cast and prepared for tensiletesting. Tensile tests ...
<p>As the most fundamental deformation mechanism in metallic glasses (MGs), the shear banding has at...
International audienceUsing viscosity measurement method and in-situ heating synchrotron radiation, ...
International audienceHigh temperature deformation of a ZrTiCuNiBe bulk metallic glass (BMG) is inve...
High temperature bonded interface indentation experiments are carried out on a Zr based bulk metalli...
High temperature deformation behavior of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk amorphous alloy has bee...
Despite the high attendance of shear banding in metallic glasses and other disordered materials, the...
cited By 0International audienceIn the current research, the dynamic mechanical spectrum and compres...
Inelastic deformation of metallic glass is through shear banding, characterized by significantly loc...
Based on the facts that the thickness of a shear band in bulk metallic glasses (BMGs) is a few tens ...
cited By 5International audienceA systematic study on the thermal properties, deformation behaviors,...
The high-temperature rheological behavior, around the glass transition temperature, of a Zr48Cu34Ag8...
The plastic deformation behavior and serrated flow in seven bulk metallic glass (BMG) systems were i...
International audienceIt is well known that nickel-free zirconium-based bulk metallic glasses are of...
We present a systematic investigation of shear-band dynamics as a function of chemical composition i...
Zr70Ni16Cu6Al8 bulk metallic glass samples were cast and prepared for tensiletesting. Tensile tests ...
<p>As the most fundamental deformation mechanism in metallic glasses (MGs), the shear banding has at...
International audienceUsing viscosity measurement method and in-situ heating synchrotron radiation, ...
International audienceHigh temperature deformation of a ZrTiCuNiBe bulk metallic glass (BMG) is inve...
High temperature bonded interface indentation experiments are carried out on a Zr based bulk metalli...
High temperature deformation behavior of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk amorphous alloy has bee...
Despite the high attendance of shear banding in metallic glasses and other disordered materials, the...
cited By 0International audienceIn the current research, the dynamic mechanical spectrum and compres...
Inelastic deformation of metallic glass is through shear banding, characterized by significantly loc...
Based on the facts that the thickness of a shear band in bulk metallic glasses (BMGs) is a few tens ...
cited By 5International audienceA systematic study on the thermal properties, deformation behaviors,...
The high-temperature rheological behavior, around the glass transition temperature, of a Zr48Cu34Ag8...
The plastic deformation behavior and serrated flow in seven bulk metallic glass (BMG) systems were i...
International audienceIt is well known that nickel-free zirconium-based bulk metallic glasses are of...
We present a systematic investigation of shear-band dynamics as a function of chemical composition i...