International audienceTwo grades of ferritic stainless steel, a bi-stabilised Ti, Nb (AISI 441) and a stabilised Ti (AISI 439), were oxidised at 1060 degrees C under the simulated process atmosphere for durations between 45 and 1800 s. Focused ion beam coupled with field emission gun and scanning electron microscopy was carried out to investigate the cross-section morphology of the oxide growing on ferritic stainless steels. Matrix protrusions localised at the metal - chromia interface through the silica layer are observed and the following mechanism for their formation is proposed. During the first step of oxidation, interface undulation, induced by growth stresses, in combination with silica precipitation at the metal - oxide interface le...
Detailed microstructure investigations were performed on oxide scales formed on 310 stainless steel ...
In situ X-ray photoelectron spectroscopy real-time measurements and angular-dependent high resolutio...
International audienceThe life time of stabilized ferritic stainless steels used as car exhaust part...
International audienceHigh temperature oxidation of ferritic stainless steel for short durations lea...
This thesis concerns the high temperature oxidation of iron and some stainless steels. The oxide sca...
This study aims to investigate the oxidation behaviour at high temperature of a commercial ferritic...
Stainless steels of type AISI 304 and 316 were heated in air (1-5-15 minutes at 900-1000-1100 °C) an...
International audienceBreakaway oxidation of 15-18% Cr ferritic stainless steels occurring in water ...
Abstract.- Stainless steels of type AISI 304 and 316 were heated in air (1-5-15 minutes at 900-1000-...
The influence of cold work on the initially formed oxide layer on the stainless steels AISI 304 and ...
The oxidation behavior of a ferritic steel Fe-23Cr-0.5Mn-0.6 Nb-0.1Ti (at%) considered for applicati...
© 2014 Elsevier B.V. The aim of this study is to optimise the stainless steel oxidation behaviours d...
We investigated the various oxidation conditions of stainless-steel surface using synchrotron radiat...
Detailed microstructure investigations were performed on oxide scales formed on 310 stainless steel ...
© 2016 Elsevier Ltd. The breakaway oxidation behaviour of ferritic stainless steels 430, 443 and 445...
Detailed microstructure investigations were performed on oxide scales formed on 310 stainless steel ...
In situ X-ray photoelectron spectroscopy real-time measurements and angular-dependent high resolutio...
International audienceThe life time of stabilized ferritic stainless steels used as car exhaust part...
International audienceHigh temperature oxidation of ferritic stainless steel for short durations lea...
This thesis concerns the high temperature oxidation of iron and some stainless steels. The oxide sca...
This study aims to investigate the oxidation behaviour at high temperature of a commercial ferritic...
Stainless steels of type AISI 304 and 316 were heated in air (1-5-15 minutes at 900-1000-1100 °C) an...
International audienceBreakaway oxidation of 15-18% Cr ferritic stainless steels occurring in water ...
Abstract.- Stainless steels of type AISI 304 and 316 were heated in air (1-5-15 minutes at 900-1000-...
The influence of cold work on the initially formed oxide layer on the stainless steels AISI 304 and ...
The oxidation behavior of a ferritic steel Fe-23Cr-0.5Mn-0.6 Nb-0.1Ti (at%) considered for applicati...
© 2014 Elsevier B.V. The aim of this study is to optimise the stainless steel oxidation behaviours d...
We investigated the various oxidation conditions of stainless-steel surface using synchrotron radiat...
Detailed microstructure investigations were performed on oxide scales formed on 310 stainless steel ...
© 2016 Elsevier Ltd. The breakaway oxidation behaviour of ferritic stainless steels 430, 443 and 445...
Detailed microstructure investigations were performed on oxide scales formed on 310 stainless steel ...
In situ X-ray photoelectron spectroscopy real-time measurements and angular-dependent high resolutio...
International audienceThe life time of stabilized ferritic stainless steels used as car exhaust part...