Standard method for performing positron emission particle tracking (PEPT) measurements of froth flotation at PEPT Cape Town

Positron emission particle tracking (PEPT) is a technique for measuring the motion of tracer particles in systems of flow such as mineral froth flotation. An advantage of PEPT is that tracer particles with different physical properties can be tracked in the same experimental system, which allows detailed studies of the relative behaviour of different particle classes in flotation. This work describes the standard operating protocol developed for PEPT experiments in a flotation vessel at PEPT Cape Town in South Africa. A continuously overflowing vessel with constant air recovery enables several hours of data acquisition at steady state flow and consistent flotation conditions. Tracer particles are fabricated with different coatings to mimic mineral surface hydrophobicity and size, and a data treatment derived from a rotating disk study is utilized to produce high frequency (1 kHz) location data relative to the tracer activity. Time averaging methods are used to represent the Eulerian flow field and occupancy of the tracer behaviour based on voxel schemes in different co-ordinate systems. The average velocity of the flow in each voxel is calculated as the peak of the probability density function to represent the peak of asymmetrical or multimodal distributions. • A continuously overflowing flotation vessel was developed for extended data acquisition at steady state flow. • The data treatment enabled the direct comparison of different particle classes in the flotation vessel. • The solids flow fields was described by the probability density function of tracer particle velocity measured in different voxel schemes