Hydrophobic recovery of repeatedly plasma-treated silicone rubber .2. A comparison of the hydrophobic recovery in air, water, or liquid nitrogen

Surfaces of medical grade silicone rubber (Q7-4750, Dow Coming) were modified by repeated (six times) RF plasma treatments using various discharge gases: oxygen, argon, carbon dioxide, and ammonia. The treated samples were stored for a period of 3 months in ambient air, water, or liquid nitrogen. Subsequently, the temporal behavior of the effects of the plasma treatment on the physicochemical surface properties of the silicone rubber was investigated using water contact angle measurements and X-ray photoelectron spectroscopy (XPS). Hydrophobic recovery during 3 months storage in ambient air was considerable and nearly complete for all four plasmas used. Hydrophobic recovery was almost completely suppressed during storage in liquid nitrogen, and only a minor increase of around 10 degrees in advancing water contact angle was observed for all four plasma treatments. Also during storage of treated samples in water, hydrophobic recovery was minimal and initiated again by returning the treated samples to ambient air. XPS analyses showed that argon, carbon dioxide, and ammonia plasma-treated silicone rubber all had increased carbon percentages at the expense of oxygen and silicon after storage in water, or in liquid nitrogen, compared with after storage in ambient air. Interestingly, the carbon content of oxygen plasma-treated silicone rubber decreased during storage in water, or in liquid nitrogen, compared with storage in ambient air, while its oxygen and silicon percentages increased.