Add to ORKGThe results of an experimental study of the effects of fibre diameter and testing length on the strength of polyethylene fibres prepared by the gel-spinning-hot-drawing process are reported. These size effects have been studied in fibres covering a range of mechanical properties in order to establish how size effects are related to fibre structure. It was found that both types of size effect studied are present in polyethylene fibres, and that the magnitude of both changes with increasing modulus of elasticity of the fibre; length effects become weaker and disappear completely, whereas diameter effects become more pronounced as the fibre modulus increases. This behaviour shows that transverse and longitudinal size effects cannot be describe...
The cross section values obtained from fibre “diameter” measurements on a range of natural fibres we...
The purpose of this study is to gain an understanding of parameters that affect the strength of yarn...
International audienceThe aim of this paper is to investigate the origin of the diameter-dependence ...
The results of an experimental study of the effects of fibre diameter and testing length on the stre...
In the continuous drawing of gel-spun UHMWPE fibres, the diameter of the undrawn fibre appears to ha...
The effect of test specimen size on the unnotched strength of continuous fibre reinforced composites...
The influence of fiber diam. on the tensile strength of soln.-spun, ultradrawn, ultrahigh-mol.-wt. p...
Gel- and suspension-spun fibres of ultra-high molecular weight polyethylene have been subjected to h...
Epoxy fibers with different diameters were prepared by hot drawing and their mechanical properties w...
This thesis deals with the tensile behaviour of fibres prepared from high molecular weight polymers....
Fiber length is the fiber property which has been measurable for a long time. Therefore it is very o...
This paper is concerned with scale and size effects in the strength characterisation of composite ma...
Abstract: The conference lecture gives an overview of the problems of scaling and size effect in sol...
The cross section values obtained from fibre “diameter” measurements on a range of natural fibres we...
The purpose of this study is to gain an understanding of parameters that affect the strength of yarn...
International audienceThe aim of this paper is to investigate the origin of the diameter-dependence ...
The results of an experimental study of the effects of fibre diameter and testing length on the stre...
In the continuous drawing of gel-spun UHMWPE fibres, the diameter of the undrawn fibre appears to ha...
The effect of test specimen size on the unnotched strength of continuous fibre reinforced composites...
The influence of fiber diam. on the tensile strength of soln.-spun, ultradrawn, ultrahigh-mol.-wt. p...
Gel- and suspension-spun fibres of ultra-high molecular weight polyethylene have been subjected to h...
Epoxy fibers with different diameters were prepared by hot drawing and their mechanical properties w...
This thesis deals with the tensile behaviour of fibres prepared from high molecular weight polymers....
Fiber length is the fiber property which has been measurable for a long time. Therefore it is very o...
This paper is concerned with scale and size effects in the strength characterisation of composite ma...
Abstract: The conference lecture gives an overview of the problems of scaling and size effect in sol...
The cross section values obtained from fibre “diameter” measurements on a range of natural fibres we...
The purpose of this study is to gain an understanding of parameters that affect the strength of yarn...
International audienceThe aim of this paper is to investigate the origin of the diameter-dependence ...