Designing of Next Generation Motor Drive Control for Electric Vehicle Application

In order to achieve a mission of zero emission, as most automotive industries around the world are pledging to, the research and production of efficient and eco-friendly electrified vehicles (EVs) is a necessary goal to pursue. They are of high interest to governments and research facilities across the world as they have higher efficiency levels and are more environmentally friendly than current gasoline vehicles. At the core of electric vehicle application, electric motor drives act an important role to direct the motor to convert electrical energy into mechanical energy and provide electrical control of the processes. Therefore, it is required for researchers to make the motor drive more energy-efficient and have bi-directional power flow capability to ensure the improvement of motor performance and be flexible regarding controllability. The goal of the author is to investigate the development of a better motor-drive to achieve a control that provides a superior control of the traction motor. This requires improving the existing flux weakening motor control that is used for traction application. The improved control is programmed and hard coded into a Digital signal processor which is embedded in the control drive board. In a conventional inverter, this drive unit controls the gate drivers which in turn controls the IGBTs, there by enabling variation in operating performance of the motor. Currently, there is a lack of unified program that can operate any kind of traction motor like permanent magnet synchronous motors (PMSM) or induction motors(IM). This is leading automotive industries to invest a lot of resources in research and development in this field of work so that the future vehicles can be swapped with any motor as per requirement. The authors are currently working on developing this motor control and also reducing the complexity of the code and real-time operation on the microcontroller. This will be implemented in future on existing and new-generation inverters to test the control on various motor and inverter setups