Add to ORKGThe paper develops a new methodology of FE modelling and simulation of the SPS and SP systems under 6 kg TNT blast shock wave. SPS code refers to the range stand – protected plate – protective shield ALF system, while PS code refers to the range stand – protected plate system. The multiple – use portable range stand for testing protective shields against blast loadings was developed under Research and Development Project No. O 0062 R00 06. System SPS uses high strength M20 erection bolts to connect the protective shield to the protected plate. In reference to the SPS system, validation explosion test was performed. It has pointed out that the developed methodology of numerical modelling and simulation of SPS and PS systems, using CATIA...
In the current work, a series of step-by-step research methods have been applied to address the dama...
One of the main threats to military vehicles originates from landmine blasts. In order to improve th...
Preliminary notes The paper describes the process of determining the blast load on structures and pr...
The study presents FE modelling and simulation of a system for range testing of protective shields f...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
Vented suppressive shield (VSS) containers have traditionally been used to store hazardous materials...
The article presents a method for numerical modelling of interaction of a shock wave on a simplified...
The current state of blast resistant design methods is largely reliant on empirical observations of ...
The current state of blast resistant design methods is largely reliant on empirical observations of ...
In the past decade, there has been an increasing demand from governments for high level protections ...
Structural blast analysis is usually done with two load levels for different design stages; the Stre...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the current work, a series of step-by-step research methods have been applied to address the dama...
One of the main threats to military vehicles originates from landmine blasts. In order to improve th...
Preliminary notes The paper describes the process of determining the blast load on structures and pr...
The study presents FE modelling and simulation of a system for range testing of protective shields f...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
Vented suppressive shield (VSS) containers have traditionally been used to store hazardous materials...
The article presents a method for numerical modelling of interaction of a shock wave on a simplified...
The current state of blast resistant design methods is largely reliant on empirical observations of ...
The current state of blast resistant design methods is largely reliant on empirical observations of ...
In the past decade, there has been an increasing demand from governments for high level protections ...
Structural blast analysis is usually done with two load levels for different design stages; the Stre...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the past decade, there has been an increasing demand from governments for high level protections ...
In the current work, a series of step-by-step research methods have been applied to address the dama...
One of the main threats to military vehicles originates from landmine blasts. In order to improve th...
Preliminary notes The paper describes the process of determining the blast load on structures and pr...