This paper presents the influence of annealing time 30, 60 and 120 min at 1000 C for quenching CuAl7Fe5Ni5W2Si2 bronze in 10% water solution of NaCl, on the microstructure and mechanical properties. The presented results concern the species newly developed aluminum-iron-nickel bronze, with additions W and Si. In order to determine changes in the microstructure of the hardened bronze metallographic studies were performed on cylindrical samples of diameter 10 mm, on the metallographic microscope with digital image analysis, X-ray phase analysis, EDX point with the digital recording on the computer. Specified percentage of the microstructure of martensite and bainite, participation of proeutectoid \alfa phase in the microstructure, grain size ...
In this paper, the microstructure and mechanical properties of the SG-CuAl8Ni6 Ni-Al bronze straight...
Aluminium bronzes are used for their combination of high strength, excellent corrosion and wear resi...
Wire and Arc based Additive Manufacturing (WAAM) processes are novel technologies that are seen as p...
The aim of this study was to investigate the effect of a two-step isothermal annealing respectively ...
Effect of heat treatment on micro structural changes in aluminium bronze This paper attempts to summ...
The influence of annealing treatment on the microstructure and the corrosion behaviour of a complex ...
Wire and Arc Additive Manufacturing (WAAM) is a promising rapid prototyping process, which can poten...
Small additions of Cr, Mo and W to aluminium-iron-nickel bronze are mostly located in phases &kappa ...
The effect of dopant and heat treatment on the microstructure and mechanical properties of Nickel-al...
NiAl bronze (NAB) alloy is prepared by using friction stir processing (FSP) technique at a tool rota...
The influence of annealing treatment on the microstructure and the corrosion behaviour of a complex ...
The article presents the investigation results of the crystallization (performed by means of the TDA...
The effect has been studied of quenching in water and oil, of air-cooling, and of subsequent temperi...
According to the analysis of the current state of the knowledge shows that there is little informati...
According to the analysis of the current state of the knowledge shows that there is little informati...
In this paper, the microstructure and mechanical properties of the SG-CuAl8Ni6 Ni-Al bronze straight...
Aluminium bronzes are used for their combination of high strength, excellent corrosion and wear resi...
Wire and Arc based Additive Manufacturing (WAAM) processes are novel technologies that are seen as p...
The aim of this study was to investigate the effect of a two-step isothermal annealing respectively ...
Effect of heat treatment on micro structural changes in aluminium bronze This paper attempts to summ...
The influence of annealing treatment on the microstructure and the corrosion behaviour of a complex ...
Wire and Arc Additive Manufacturing (WAAM) is a promising rapid prototyping process, which can poten...
Small additions of Cr, Mo and W to aluminium-iron-nickel bronze are mostly located in phases &kappa ...
The effect of dopant and heat treatment on the microstructure and mechanical properties of Nickel-al...
NiAl bronze (NAB) alloy is prepared by using friction stir processing (FSP) technique at a tool rota...
The influence of annealing treatment on the microstructure and the corrosion behaviour of a complex ...
The article presents the investigation results of the crystallization (performed by means of the TDA...
The effect has been studied of quenching in water and oil, of air-cooling, and of subsequent temperi...
According to the analysis of the current state of the knowledge shows that there is little informati...
According to the analysis of the current state of the knowledge shows that there is little informati...
In this paper, the microstructure and mechanical properties of the SG-CuAl8Ni6 Ni-Al bronze straight...
Aluminium bronzes are used for their combination of high strength, excellent corrosion and wear resi...
Wire and Arc based Additive Manufacturing (WAAM) processes are novel technologies that are seen as p...