The modified surface layers of Mg enriched with Al and Si were fabricated by thermochemical treatment. The substrate material in contact with an Al + 20 wt.% Si powder mixture was heated to 445ºC for 40 or 60 min. The microstructure of the layers was examined by OM and SEM. The chemical composition of the layer and the distribution of elements were determined by energy dispersive X-ray spectroscopy (EDS). The experimental results show that the thickness of the layer is dependent on the heating time. A much thicker layer (1 mm) was obtained when the heating time was 60 min than when it was 40 min (600 μm). Both layers had a non-homogeneous structure. In the area closest to the Mg substrate, a thin zone of a solid solution of Al in Mg was det...
Fluidized bed technology is a methodology widely known in the manufacturing environment for surface ...
The current work presents a detailed study on the high temperature processing of solution treated Al...
The chemical and phase composition of the coating and the coating/substrate interface of an Al-Si-co...
The modified surface layers of Mg enriched with Al and Si were fabricated by thermochemical treatmen...
The thermochemical treatment applied to improve the surface properties of AZ91 consisted in heating ...
Al- and Al/Zn-enriched layers containing intermetallic phases were deposited on the Mg substrate by ...
The Al/Zn-enriched surface layers were fabricated on Mg substrate by heating the specimens in contac...
In this study, Al-containing coatings were prepared on the surface of AZ31 magnesium alloy by pack-c...
This work examines the influence of the thermal treatment conditions at T>1150°C, on the microstr...
An Al-20Mg-4Si high Mg containing alloy has been produced and its characteristics investigated. The ...
Al-enriched layer was formed on a magnesium substrate with use of casting. The magnesium melt was ca...
In order to improve the magnetic properties of electrical steels, it may be desirable to increase th...
AbstractSurface refining of Al–Si alloy was carried out using the ‘Gas Tungsten Arc’ (GTA) heat sour...
Microstructural characterization using scanning electron microscopy and scanning transmission electr...
Solid reactions between Ni and relaxed Si0.7Ge0.3 substrate were systematically investigated with di...
Fluidized bed technology is a methodology widely known in the manufacturing environment for surface ...
The current work presents a detailed study on the high temperature processing of solution treated Al...
The chemical and phase composition of the coating and the coating/substrate interface of an Al-Si-co...
The modified surface layers of Mg enriched with Al and Si were fabricated by thermochemical treatmen...
The thermochemical treatment applied to improve the surface properties of AZ91 consisted in heating ...
Al- and Al/Zn-enriched layers containing intermetallic phases were deposited on the Mg substrate by ...
The Al/Zn-enriched surface layers were fabricated on Mg substrate by heating the specimens in contac...
In this study, Al-containing coatings were prepared on the surface of AZ31 magnesium alloy by pack-c...
This work examines the influence of the thermal treatment conditions at T>1150°C, on the microstr...
An Al-20Mg-4Si high Mg containing alloy has been produced and its characteristics investigated. The ...
Al-enriched layer was formed on a magnesium substrate with use of casting. The magnesium melt was ca...
In order to improve the magnetic properties of electrical steels, it may be desirable to increase th...
AbstractSurface refining of Al–Si alloy was carried out using the ‘Gas Tungsten Arc’ (GTA) heat sour...
Microstructural characterization using scanning electron microscopy and scanning transmission electr...
Solid reactions between Ni and relaxed Si0.7Ge0.3 substrate were systematically investigated with di...
Fluidized bed technology is a methodology widely known in the manufacturing environment for surface ...
The current work presents a detailed study on the high temperature processing of solution treated Al...
The chemical and phase composition of the coating and the coating/substrate interface of an Al-Si-co...