The Impact of Composition and the Densification Level of Furan Molding Compounds on the Strength of Large-Size Casting Molds

The paper presents the test results of molding compounds, sand casting molds and their analysis. The subject of testing was compound containing furan resins prepared according to the following recipe: matrix – regenerate 90% + fresh sand – 10%, furanresin – 1.10% by weight, hardener – 0.40% by weight. The impact of adhesive type and its quantity (Quan = 0.90, 1.1 and 1.5%) on the strength indexes of molding compound subject to densification was analyzed. The publication presents the test results: tensile strength Rm, compressive strength Rc and flexural strength Rg, as well as compound permeability as function of its density. The analysis also covers the impact of density level on mold strength and the distribution of density level along the mold height. Based on the test results, it was found that the best method to obtain high strength molds made from compounds with chemical adhesives was to densify it by vibrating the system: match plate – molding flask – compound filling the mold. The effectiveness of this densification method depends on the amplitude and frequency of vibrations