Add to ORKGW pracy przedstawiono wyniki badań kawitacyjnych powłoki TiN wytworzonej na stali austenitycznej 1H18N9T metodą katodowego odparowania łukowego (ARC). Ocenę odporności kawitacyjnej powłoki TiN przeprowadzano w oparciu o badania na stanowisku przepływowym ze szczelinowym wzbudnikiem kawitacji. Stwierdzono, że okres inkubacji uszkodzeń powłoki TiN jest o ok. 100% dłuższy niż w przypadku nie pokrytej stali 1H18N9T. Analiza z wykorzystaniem mikroskopii skaningowej wskazuje, że proces niszczenia powłoki TiN następuje głównie w wyniku jej delaminacji.Results of investigation on cavitation erosion resistance of TiN coating deposited on stainless steel 1H18N9T by means of the cathodic arc method are presented. The evaluation of TiN coating resistan...
Austenitic stainless steel UNS S31603 was laser surface alloyed with various elements (Co, Ni, Mn, C...
Research on Nano layer coating application for the improvement of the resistance to cavitation erosi...
The relevance of the research is caused by the need to study the resistance of metals and their coat...
The results of the cavitation erosion resistance of nanostructure TiN, CrN and WC/a:C-H coatings dep...
The cavitation erosion behavior of Fe-based amorphous/nanocrystalline coatings has been investigated...
In this work is presented the results of the corrosion erosion resistance evaluation by cavitation o...
This article presents the evaluation of the corrosion erosion resistance erosion caused by cavitatio...
In this work is presented the mitigation of the damages caused by the corrosion erosion phenomenon t...
Seawater is an aggressive environment which causes the necessity of using corrosion protection of hu...
The arc spraying process was used to prepare Fe-based amorphous/nanocrystalline coating. The cavitat...
Introduction. Reliability-critical components of equipment working in contact with high-speed liquid...
Abstract: The duplex stainless steels , influence the increase of the exposed surface to cavitati...
Amostras do aço inoxidável UNS S31803, nitretadas em alta temperatura, com 0,9 % de nitrogênio em so...
The Ni-Co based coatings were performed by means of PTA method from Ni-based and Co-based powders. T...
[[abstract]]The cavitation-erosion behavior of chromium nitride (CrN) coatings on AISI 4140 steel in...
Austenitic stainless steel UNS S31603 was laser surface alloyed with various elements (Co, Ni, Mn, C...
Research on Nano layer coating application for the improvement of the resistance to cavitation erosi...
The relevance of the research is caused by the need to study the resistance of metals and their coat...
The results of the cavitation erosion resistance of nanostructure TiN, CrN and WC/a:C-H coatings dep...
The cavitation erosion behavior of Fe-based amorphous/nanocrystalline coatings has been investigated...
In this work is presented the results of the corrosion erosion resistance evaluation by cavitation o...
This article presents the evaluation of the corrosion erosion resistance erosion caused by cavitatio...
In this work is presented the mitigation of the damages caused by the corrosion erosion phenomenon t...
Seawater is an aggressive environment which causes the necessity of using corrosion protection of hu...
The arc spraying process was used to prepare Fe-based amorphous/nanocrystalline coating. The cavitat...
Introduction. Reliability-critical components of equipment working in contact with high-speed liquid...
Abstract: The duplex stainless steels , influence the increase of the exposed surface to cavitati...
Amostras do aço inoxidável UNS S31803, nitretadas em alta temperatura, com 0,9 % de nitrogênio em so...
The Ni-Co based coatings were performed by means of PTA method from Ni-based and Co-based powders. T...
[[abstract]]The cavitation-erosion behavior of chromium nitride (CrN) coatings on AISI 4140 steel in...
Austenitic stainless steel UNS S31603 was laser surface alloyed with various elements (Co, Ni, Mn, C...
Research on Nano layer coating application for the improvement of the resistance to cavitation erosi...
The relevance of the research is caused by the need to study the resistance of metals and their coat...