Propeller optimization for small unmanned aerial vehicles

Small-unmanned aerial vehicle propellers usually have a low figure of merit due to operating in the low Reynold’s number region due to their size and velocity. The airflow on the airfoil becomes increasingly laminar in this region thus increasing the profile drag and consequently reducing the figure of merit of the rotor. In the article, the airfoil geometries are parameterized using the Class/Shape function transformation. Particle swarm optimization is used to design an airfoil, operating in a Reynolds number of 100,000, which has a high lift to drag ratio. To avoid exceeding geometric constraints of the airfoil, a deterministic box constraint is added to the algorithm. The optimized airfoil is then used for a preliminary design of a rotor; given some design, constraints on the tip chord the rotor radius and the blade root chord, with parameters that achieve the highest theoretical figure of merit. The rotor parameters are obtained using a combination of momentum theory and blade element theory. The figure of merit of an optimal propeller with the same geometric parameters is then compared using the optimized airfoil and the Clark Y airfoil. The optimization is done in MATLAB while the aerodynamic coefficients are obtained from XFOIL. The results of the numerical simulation are presented in the article