Comparative analysis of the operating indexes of manually and automatically controlled passenger car powertrain system at variable load states

This article reports the results of a study into operating parameters of a system consisting of an SI engine and a powertrain in a Fiat Panda passenger car in the conditions of a variable load. The analysis was primarily concerned with the variability of fuel consumption resulting of the changing load applied to the driving wheels in the conditions of a test performed on chassis dynamometer for manual and automatic controlled transmission gear change The test bench included a dedicated driving cycle, which was developed as cycle with periodically changed constant linear speed of the car every 10 km/h. According to the vehicle set speed, the load on its wheels was determined by the basic resistance as rolling resistance, air resistance and resistance corresponding to road inclination. Each period of a drive cycle corresponding to steady state driving gave the average instantaneous values of drive system performance indicators. The waveforms of these indicators were recorded and then averaged and presented as representative points of the powertrain system that were analysed. The focus of the study involved the identification of the points characterized with the minimum specific fuel consumption and impact of type of powertrain control on emission of CO2 from passenger car SI engines