Add to ORKGI have attempted to meet request on lightweight functional materials with low friction coefficient and high wear resistance reported by various areas of industry. For this purpose I attempted to combine good tribological properties of MoS2 (Ti,W) coatings base and modified and refined silumin. In addition, under MoS2 (Ti,W) coating the Cr interlayer was deposited having the task to increase the adhesion of the coating to the substrate. In such a composite tribological tests were the major studies. Additionally, for the characterization of deposited coatings the following studies were conducted: qualitative analysis of the phase composition of X-ray diffraction (XRD), linear analysis of the distribution of selected elements (EDS), nano-hardn...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
Chemical vapor deposition (CVD) is an efficient approach to prepare coatings on complex cutting tool...
As previously reported (Fox et al., Proc. PSE Conf., Garmisch Partenkirchen, 14–18 September, 1998),...
Cr or Ti doped MoS2 coatings with different Cr or Ti content were deposited on high speed substrate ...
Multi-layer composite surface coatings made of MoS2/titanium, exhibit good mechanical and tribologic...
The main aim of the studies was the deposition of the AlCrN film, covered by molybdenum disulphide (...
As previously reported (V.C. Fox, N.M. Renevier, D.G., Teer, J. Hampshire, V. Rigato, Proceedings of...
As previously reported (V.C. Fox, N.M. Renevier, D.G., Teer, J. Hampshire, V. Rigato, Proceedings of...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
It has been proved that the co-deposition of a proper amount of titanium can significantly improve t...
It has been proved that the co-deposition of a proper amount of titanium can significantly improve t...
The main aim of the studies was the deposition of the AlCrN film, covered by molybdenum disulphide (...
Chemical vapor deposition (CVD) is an efficient approach to prepare coatings on complex cutting tool...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
Chemical vapor deposition (CVD) is an efficient approach to prepare coatings on complex cutting tool...
As previously reported (Fox et al., Proc. PSE Conf., Garmisch Partenkirchen, 14–18 September, 1998),...
Cr or Ti doped MoS2 coatings with different Cr or Ti content were deposited on high speed substrate ...
Multi-layer composite surface coatings made of MoS2/titanium, exhibit good mechanical and tribologic...
The main aim of the studies was the deposition of the AlCrN film, covered by molybdenum disulphide (...
As previously reported (V.C. Fox, N.M. Renevier, D.G., Teer, J. Hampshire, V. Rigato, Proceedings of...
As previously reported (V.C. Fox, N.M. Renevier, D.G., Teer, J. Hampshire, V. Rigato, Proceedings of...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
It has been proved that the co-deposition of a proper amount of titanium can significantly improve t...
It has been proved that the co-deposition of a proper amount of titanium can significantly improve t...
The main aim of the studies was the deposition of the AlCrN film, covered by molybdenum disulphide (...
Chemical vapor deposition (CVD) is an efficient approach to prepare coatings on complex cutting tool...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
The properties of MoS2 coatings deposited by closed field unbalanced magnetron sputter ion plating h...
Chemical vapor deposition (CVD) is an efficient approach to prepare coatings on complex cutting tool...
As previously reported (Fox et al., Proc. PSE Conf., Garmisch Partenkirchen, 14–18 September, 1998),...