Adhoc routing based data collection application in wireless sensor networks

Master of ScienceDepartment of Computing and Information SciencesGurdip SinghAd hoc based routing protocol is a reactive protocol to route messages between mobile nodes. It allows nodes to pass messages through their neighbors to nodes which they cannot directly communicate. It uses Route Request (RREQ) and Route Reply (RREP) messages for communication. Wireless sensor networks consist of tiny sensor motes with capabilities of sensing, computation and wireless communication. This project aims to implement data collector application to collect the temperature data from the set of wireless sensor devices located within a building, which will help in gathering the information by finding the route with minimum number of hops to reach destination and generates low message traffic by not encouraging the duplicate message within the network. Using this application, wireless devices can communicate effectively to provide the network information to the user. This system consists of a mobile wireless sensor device called base station which is connected to a PC to communicate and is the root of the network. It also consists of set of client sensor devices which are present in different parts of the building. This project has been evaluated by determining how well the ad hoc protocol performs by measuring the number of messages and time consumed in learning about the complete topology. This application will eventually find the path with minimum number of hops. Simple Network Management Protocol (SNMP) is also used to monitor the sensor nodes remotely. This project was developed using nesC and C programming languages with TinyOS and UNIX based operating systems. It has been tested with a sufficient number of motes and evaluated based on the number of messages generated and number of hops traveled for each route request