Crosslinking Super Yellow to produce super OLEDs Crosslinking with azides enables improved performance

An increasing number of organic light emitting diodes OLEDs is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene vinylene emitter. This allows the use of an additional poly[bis 4 phenyl 2,4,6 trimethylphenyl amine electron blocking layer EBL from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56 increase in current efficac