During the last twenty years over 10000m of ice core have been recovered through the use of antifreeze thermal electric drills (ATED). An environmentally safe ethanol-water solution (EWS) was utilized as a borehole liquid. The ATED method has been widely used on high mountain temperate and polar glaciers. At glacier temperatures (T_i) from -28 to -8℃ the ATED penetration rate is about 420-450m/wk (I. A. ZOTIKOV; CRREL Rep., 79-24,12p., 1979; V. S. ZAGORODNOV; Ice Core Drilling : Proc. 3rd Int. Workshop Ice Drilling Tech., 97,1989). In Antarctica a borehole of 800m depth was drilled in ice at T_i=-53℃ in two month. Drilling of this borehole was continued the next field season. The major cause of ice core fracture under thermal drilling is th...
During the EUROCORE project in 1989 at Summit, Central Greenland, a 304.8-m long ice core of 105mm d...
Directional Drilling (DD) technology can be used in deep glacier boreholes to obtain additional ice ...
Abstract The Rapid Access Ice Drill (RAID) was designed and built to rapidly drill th...
Thermal ice coring processes are accompanied by stresses in an ice core; micro-and macro-cracks are ...
A common fear for all ice drillers is a stuck drill. A less severe but important concern is a foreig...
A total of 11 ice cores to a maximum depth of 460 m have been obtained over the past 3 years from hi...
Deep boreholes in polar ice sheets have to be filled with a liquid in order to prevent hole closure ...
Electric thermal drills are more advantageous than electromechanical drills in temperate, near-tempe...
This paper is based on the data published in research report of P. G. Talalay and N. S. Gundestrup; ...
Abstract: We propose that a new type of drill, alternately known as a Fast Mechanical-Access Drill, ...
Chemical deicing is a common and necessary procedure in several fields of application. This study in...
AbstractA next-generation drilling system, equipped with a thermal drilling device, is proposed for ...
In May 1999, drilling of a borehole through the entire ice strata (around 750 m) was initiated on t...
A 45.97m-deep drilling operation was carried out during November/December 1999 on the accumulation a...
During the EUROCORE project in 1989 at Summit, Central Greenland, a 304.8-m long ice core of 105mm d...
During the EUROCORE project in 1989 at Summit, Central Greenland, a 304.8-m long ice core of 105mm d...
Directional Drilling (DD) technology can be used in deep glacier boreholes to obtain additional ice ...
Abstract The Rapid Access Ice Drill (RAID) was designed and built to rapidly drill th...
Thermal ice coring processes are accompanied by stresses in an ice core; micro-and macro-cracks are ...
A common fear for all ice drillers is a stuck drill. A less severe but important concern is a foreig...
A total of 11 ice cores to a maximum depth of 460 m have been obtained over the past 3 years from hi...
Deep boreholes in polar ice sheets have to be filled with a liquid in order to prevent hole closure ...
Electric thermal drills are more advantageous than electromechanical drills in temperate, near-tempe...
This paper is based on the data published in research report of P. G. Talalay and N. S. Gundestrup; ...
Abstract: We propose that a new type of drill, alternately known as a Fast Mechanical-Access Drill, ...
Chemical deicing is a common and necessary procedure in several fields of application. This study in...
AbstractA next-generation drilling system, equipped with a thermal drilling device, is proposed for ...
In May 1999, drilling of a borehole through the entire ice strata (around 750 m) was initiated on t...
A 45.97m-deep drilling operation was carried out during November/December 1999 on the accumulation a...
During the EUROCORE project in 1989 at Summit, Central Greenland, a 304.8-m long ice core of 105mm d...
During the EUROCORE project in 1989 at Summit, Central Greenland, a 304.8-m long ice core of 105mm d...
Directional Drilling (DD) technology can be used in deep glacier boreholes to obtain additional ice ...
Abstract The Rapid Access Ice Drill (RAID) was designed and built to rapidly drill th...