Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

Assessment of crystal plasticity finite element simulations of the hot deformation of metals from local strain and orientation measurements

Pinna, C.
Lan, Y.
Kiu, M.F.
Efthymiadis, P.
Lopez-Pedrosa, M.
Farrugia, D.

June 2015

Simulations of the deformation of microstructures at high homologous temperatures have been carried ...

Development of numerical tools for the multiscale modelling of recrystallization in metals, based on a digital material framework

Bernacki, Marc
Chastel, Yvan
Digonnet, Hugues
Resk, Héba
Coupez, Thierry
Logé, Roland E.

January 2007

International audienceThis work is currently under development within the framework of an American-E...

Modelling and experimental analyses based on microstructural characterisation by X ray imaging : application to thermoplastic composites reinforced with short glass fibres

Ayadi, Abderrahmane

September 2016

Les thermoplastiques renforcés par des fibres de verre courtes sont devenus d’une large utilisation ...

Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

MADI, Kamel
FOREST, Samuel
BOUSSUGE, Michel
GAILLIÈGUE, Sylvain
LATASTE, Emilie
BUFFIERE, Jean-Yves
BERNARD, Dominique
JEULIN, Dominique

January 2007

This work consists in building a 3D numerical model of the microstructure of a fused-cast refractory...

Investigation of the thermomechanical properties of industrial refractories : the French programme PROMETHEREF

Boussuge, Michel

January 2008

International audienceThis paper summarises the work that has been done in the framework of the Fren...

Multiscale creep characterization and modeling of a zirconia-rich fused-cast refractory

Madi, Kamel
Gailliègue, Sylvain
Boussuge, Michel
Forest, Samuel
Gaubil, Michel
Boller, Elodie
Buffiere, Jean-Yves

January 2013

International audienceThis work aims at investigating the mechanical behaviour of a zirconia-rich fu...

Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus

Madi, Kamel

December 2006

Demand of new high quality glass compositions requires a better knowledge of the design and an optim...

Morphological analysis of the 3D microstructure of high zirconia fused-cast refractories : relationship with the mechanical, chemical properties and the behaviour during the tetragonal-monoclinic transformation

Ding, Yang

March 2012

Les THTZ (réfractaires électrofondus à Très Haute Teneur en Zircone) sont des matériaux utilisés pou...

Analyse morphologique de la microstructure 3D de réfractaires électrofondus à très haute teneur en zircone : relations avec les propriétés mécaniques, chimiques et le comportement pendant la transformation quadratique-monoclinique

Ding, Yang

March 2012

Zirconia-Rich Fused-Cast Refractories are largely used in industry to build glass furnaces. This kin...

Study of the mechanical consequences of the phase transformation in high zirconia fused-cast refractories

Zhang, Yang

March 2017

Les réfractaires électrofondus, qui constituent l’objet de ce travail, appartiennent au système alum...

Understanding Microstructure/Properties Relationships Related to the Thermomechanical Behaviour of High Zirconia Refractories

Patapy, Cédric
Gouraud, F.
Huger, M.
Guinebretiere, R.
Chotard, T.

January 2014

WOS:000348596100209International audienceNew compositions of refractory materials with a very high c...

FEM Simulation of microstructure refinement during severe deformation

Bylya, Olga
Sarangi, M K
Ovchinnikova, N V
Vasin, R A
Yakushina, E B
Blackwell, P L

January 2014

The majority of methods of severe plastic deformation (SPD) used for producing ultra-fine grained (U...

Étude du comportement post-coulée de réfractaires électrofondus à Très Haute Teneure en Zircone (THTZ)

Petroni, Laetitia

September 2011

This work has been carried out in the frame of a French national research program on new refractorie...

A microstructural finite element analysis of cement damage on Fontainebleau Sandstone

Nadimi, S.
Fonseca, J.
Bésuelle, P.
Viggiani, G.

This paper presents a numerical simulation that uses tomographic data to reproduce the grain-scale m...

Raw simulation results for Second-order homogenisation of crystal plasticity and martensitic transformation

Rodrigues Lopes, Igor A.
Vieira de Carvalho, Miguel
Marques da Silva, João
Cardoso Coelho, Rui P.
Andrade Pires, Francisco M.

May 2023

This dataset contains the raw simulation results used in the article entitled "Second-order homogeni...

Assessment of crystal plasticity finite element simulations of the hot deformation of metals from local strain and orientation measurements

Pinna, C.
Lan, Y.
Kiu, M.F.
Efthymiadis, P.
Lopez-Pedrosa, M.
Farrugia, D.

June 2015

Simulations of the deformation of microstructures at high homologous temperatures have been carried ...

Development of numerical tools for the multiscale modelling of recrystallization in metals, based on a digital material framework

Bernacki, Marc
Chastel, Yvan
Digonnet, Hugues
Resk, Héba
Coupez, Thierry
Logé, Roland E.

January 2007

International audienceThis work is currently under development within the framework of an American-E...

Modelling and experimental analyses based on microstructural characterisation by X ray imaging : application to thermoplastic composites reinforced with short glass fibres

Ayadi, Abderrahmane

September 2016

Les thermoplastiques renforcés par des fibres de verre courtes sont devenus d’une large utilisation ...

Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

MADI, Kamel
FOREST, Samuel
BOUSSUGE, Michel
GAILLIÈGUE, Sylvain
LATASTE, Emilie
BUFFIERE, Jean-Yves
BERNARD, Dominique
JEULIN, Dominique

January 2007

This work consists in building a 3D numerical model of the microstructure of a fused-cast refractory...

Investigation of the thermomechanical properties of industrial refractories : the French programme PROMETHEREF

Boussuge, Michel

January 2008

International audienceThis paper summarises the work that has been done in the framework of the Fren...

Multiscale creep characterization and modeling of a zirconia-rich fused-cast refractory

Madi, Kamel
Gailliègue, Sylvain
Boussuge, Michel
Forest, Samuel
Gaubil, Michel
Boller, Elodie
Buffiere, Jean-Yves

January 2013

International audienceThis work aims at investigating the mechanical behaviour of a zirconia-rich fu...

Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus

Madi, Kamel

December 2006

Demand of new high quality glass compositions requires a better knowledge of the design and an optim...

Morphological analysis of the 3D microstructure of high zirconia fused-cast refractories : relationship with the mechanical, chemical properties and the behaviour during the tetragonal-monoclinic transformation

Ding, Yang

March 2012

Les THTZ (réfractaires électrofondus à Très Haute Teneur en Zircone) sont des matériaux utilisés pou...

Analyse morphologique de la microstructure 3D de réfractaires électrofondus à très haute teneur en zircone : relations avec les propriétés mécaniques, chimiques et le comportement pendant la transformation quadratique-monoclinique

Ding, Yang

March 2012

Zirconia-Rich Fused-Cast Refractories are largely used in industry to build glass furnaces. This kin...

Study of the mechanical consequences of the phase transformation in high zirconia fused-cast refractories

Zhang, Yang

March 2017

Les réfractaires électrofondus, qui constituent l’objet de ce travail, appartiennent au système alum...

Understanding Microstructure/Properties Relationships Related to the Thermomechanical Behaviour of High Zirconia Refractories

Patapy, Cédric
Gouraud, F.
Huger, M.
Guinebretiere, R.
Chotard, T.

January 2014

WOS:000348596100209International audienceNew compositions of refractory materials with a very high c...

FEM Simulation of microstructure refinement during severe deformation

Bylya, Olga
Sarangi, M K
Ovchinnikova, N V
Vasin, R A
Yakushina, E B
Blackwell, P L

January 2014

The majority of methods of severe plastic deformation (SPD) used for producing ultra-fine grained (U...

Étude du comportement post-coulée de réfractaires électrofondus à Très Haute Teneure en Zircone (THTZ)

Petroni, Laetitia

September 2011

This work has been carried out in the frame of a French national research program on new refractorie...

A microstructural finite element analysis of cement damage on Fontainebleau Sandstone

Nadimi, S.
Fonseca, J.
Bésuelle, P.
Viggiani, G.

This paper presents a numerical simulation that uses tomographic data to reproduce the grain-scale m...

Raw simulation results for Second-order homogenisation of crystal plasticity and martensitic transformation

Rodrigues Lopes, Igor A.
Vieira de Carvalho, Miguel
Marques da Silva, João
Cardoso Coelho, Rui P.
Andrade Pires, Francisco M.

May 2023

This dataset contains the raw simulation results used in the article entitled "Second-order homogeni...

Assessment of crystal plasticity finite element simulations of the hot deformation of metals from local strain and orientation measurements

Pinna, C.
Lan, Y.
Kiu, M.F.
Efthymiadis, P.
Lopez-Pedrosa, M.
Farrugia, D.

June 2015

Simulations of the deformation of microstructures at high homologous temperatures have been carried ...

Development of numerical tools for the multiscale modelling of recrystallization in metals, based on a digital material framework

Bernacki, Marc
Chastel, Yvan
Digonnet, Hugues
Resk, Héba
Coupez, Thierry
Logé, Roland E.

January 2007

International audienceThis work is currently under development within the framework of an American-E...

Modelling and experimental analyses based on microstructural characterisation by X ray imaging : application to thermoplastic composites reinforced with short glass fibres

Ayadi, Abderrahmane

September 2016

Les thermoplastiques renforcés par des fibres de verre courtes sont devenus d’une large utilisation ...

Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

Abstract

Extracted data

Topics

Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

Abstract

Extracted data

Topics

Related items

Related items