Investigation of Warpage and Tolerances in Injection Moulding Components Based on Simulation and Experimental Validation

This paper presents a systematic approach to model and simulate the influence that the variation of process parameters has on the final quality of an injection moulded component. In the first phase, we define a multi-steps procedure to develop a reliable digital model of the injection moulding process by the fine-tuning of the part cavity and the mould elements (e.g. detail simplification, discretization and mesh density, elements modelling, etc.) using real data as validation. In the second phase, we investigate the correlation between selected process parameters and the final tolerances of the moulded component, based on a Design of Experiments. As a case study, we selected the body of a mass airflow sensor for an automotive high performance engines, made of polybutylene terephthalate reinforced with glass-fibre, which presents roundness issues on functional features. The effects of the injection velocity and packing pressure on the deformation of the component are investigated, identifying the best combination of their values that leads to compliance with the roundness tolerances on its functional features. The injection moulding Computer Aided Engineering (CAE) software Moldex3D (CoreTech) is used to run the simulations, and the results are finally validated by comparing the experimental data obtained from the injection moulding machine that produces the component