Add to ORKGCrystalline silicon (c-Si) suffers from poor light absorption due to its indirect band gap and high reflection from its surface (about 35% in the visible region). This problem can be solved by texturing the surface of c-Si wafer to reduce its broadband reflection. Black silicon (b-Si) or nanotextured c-Si, has a huge potential for applications in solar cell due to its superior broadband light absorption within 300-1100 nm wavelength region. In this work, two-step metal-assisted chemical etching (MACE) is used to synthesize b-Si by combining low-annealing temperature of silver (Ag) film and short duration of etching of the c-Si wafer. For the b-Si fabrication, p-type (100) c-Si wafers are deposited with 15 nm Ag film using radio frequency (R...
In this work, two electrochemical methods, i.e. electrochemical deposition and anodization have been...
Modern passenger car engines have been “down-sized” for improved fuel consumption, resulting in hig...
Two types of iron oxide prepared through two simple synthesis routes (i.e. solid state method and we...
Modification of copper mesh to achieve a superhydrophobic surface has been presented in this thesis....
This thesis focuses on fabricating monocrystalline silicon solar cell and highlights the surface pas...
The desirable physical and mechanical properties and the low machinability of glass have attracted m...
Reflective metal layer (gold and silver) in CD-R waste were separated by physical and chemical separ...
For decades, multilayer circuit boards have been often used in the electronic industry, and their ap...
Synthesic dyes are widely applied in the industries, typically textile industries, resulting the gro...
In this thesis, the physical etching of argon bombardment onto α-quartz and amorphous quartz substra...
Kajian ini bertujuan mengkaji kekasaran permukaan simen glass ionomer terisi nano berbanding dengan ...
The difficulty that exists in accurately monitoring the performance of air conditioners has made per...
This thesis reports on a new implementation of high quality factor (Q) copper (Cu) inductors on CMOS...
Concrete structure is the main materials used in constructions including the major and minor structu...
Alkaline water electrolysis is a promising technology to produce clean and pure hydrogen. This techn...
In this work, two electrochemical methods, i.e. electrochemical deposition and anodization have been...
Modern passenger car engines have been “down-sized” for improved fuel consumption, resulting in hig...
Two types of iron oxide prepared through two simple synthesis routes (i.e. solid state method and we...
Modification of copper mesh to achieve a superhydrophobic surface has been presented in this thesis....
This thesis focuses on fabricating monocrystalline silicon solar cell and highlights the surface pas...
The desirable physical and mechanical properties and the low machinability of glass have attracted m...
Reflective metal layer (gold and silver) in CD-R waste were separated by physical and chemical separ...
For decades, multilayer circuit boards have been often used in the electronic industry, and their ap...
Synthesic dyes are widely applied in the industries, typically textile industries, resulting the gro...
In this thesis, the physical etching of argon bombardment onto α-quartz and amorphous quartz substra...
Kajian ini bertujuan mengkaji kekasaran permukaan simen glass ionomer terisi nano berbanding dengan ...
The difficulty that exists in accurately monitoring the performance of air conditioners has made per...
This thesis reports on a new implementation of high quality factor (Q) copper (Cu) inductors on CMOS...
Concrete structure is the main materials used in constructions including the major and minor structu...
Alkaline water electrolysis is a promising technology to produce clean and pure hydrogen. This techn...
In this work, two electrochemical methods, i.e. electrochemical deposition and anodization have been...
Modern passenger car engines have been “down-sized” for improved fuel consumption, resulting in hig...
Two types of iron oxide prepared through two simple synthesis routes (i.e. solid state method and we...