Effects of magnetic field and particles content on rheology and resistivity behavior of magnetorheological elastomer with embedded cobalt particles

In most studies, carbonyl iron particles were merged with carbon-based particles such as graphite or carbon black particles as fillers to enhance the electrical properties of magnetorheological elastomers (MREs). These combined fillers can be replaced by using a single material in order to reduce brittleness due to the high amount of composition. Therefore, in this research, cobalt particles having dual properties, magnetic and electrical, have been employed as a filler in MRE. A total of three anisotropic MREs containing 53, 60, and 67 wt% of cobalt were fabricated through the mixing process method. The characterization related to morphological and magnetic properties of MRE samples was analyzed by using field emission scanning electron microscopy and vibrating sample magnetometer. Then, the rheological properties of the MRE in various strengths of magnetic field intensity between 0 and 0.8 T were conducted by using a rheometer. Afterward, the effect of the cobalt on the electrical properties was investigated and compared with different applied forces towards the MRE. The outcome showed that the rheological and electrical properties of MRE were improved with the increase of cobalt content embedded in the silicone matrix. Higher cobalt content in MRE contributed to a higher magnetorheological (MR) effect and simultaneously lower the electrical resistivity. Therefore, the addition of cobalt particles as a filler in MRE is a great potential to be applied as sensors