Numerical modeling of horizontally layered geosynthetic reinforced encased stone columns supporting embankment on sabkha soil

The present research work is concerned with the construction of road embankments on a Sabkha soil in Algeria. This soil is not only soft and very humid during the flooding seasons but also has frequent small areas of very soft soil which are called locally weak zones (LWZ) in the context of this study. LWZ are characterized by low strength and high compressibility. Two-dimensional axisymmetric analyses were carried out using PLAXIS 2D 2017. The study demonstrated that ordinary stone columns (OSC) are ineffective given the nature of these soils due to the excessive bulging caused by the lack of lateral pressure. On the other hand, the reinforced stone columns with external and internal reinforcements called as vertical encasement and horizontal strips (VESC+HRSC) are one of the best improvement methods of locally weak zones (LWZ), especially to increase the stability of embankment on the highway, namely, a much reduced bulging and a reasonable settlement, so that it is possible to build safe and very high embankments (indeed, numerical results showed for a (VESC+HRSC) combination, a vertical settlement of 0.74 m and a lateral deformation of 20.02 mm vs. 1.56 m and 221.16 mm for an OSC). Besides, an extensive parametric study was conducted to investigate the effect of the spacing of the horizontal reinforcing strips and of the column reinforced length. The influence of stone column diameter, depth of locally weak zone, and the effective stiffness of the geosynthetic, on the performance of the (RSC)-embankment composite were also investigated. The computational results are presented in the form of tables and graphs, and compared with previous published results available in the literature