A compact triband miniaturized MIMO antenna for WLAN applications

This paper proposes a four-port, four-element multi-band Multiple-Input Multiple-Output (MIMO) antenna array that resonates at 2.4 GHz, 2.9 GHz, and/or 5.8 GHz frequency bands for WLAN applications. A Complementary Split Ring Resonator (CSRR) was designed on the ground plane of the FR4 substrate with a rectangular patch antenna on the top plane for antenna size miniaturization, bandwidth improvement, compactness, and isolation enhancement. At first, the presence of the CSRR on the conventional antenna creates additional frequency bands and reduces the frequency of the conventional patch antenna from 24.2 GHz to 5.8 GHz. Even though the CSRR as radiating elements are closer to each other at λ/4 in the MIMO design, minimum isolation is achieved by limiting the unnecessary surface current flow that exists between the elements of the antenna. Consequently, an orthogonal method of the antenna element is adopted for the four-port MIMO antenna system with high port-to-port measured isolation of less than −19 dB, −18 dB, and –22 dB for 2.4 GHz, 2.9 GHz, and 5.8 GHz frequency bands respectively. Antenna size reduction of 96.87%, 95.41%, and 81.10% and gain of 3.94 dBi, 3.80 dBi, and 4.08 dBi were achieved for the miniaturized multi-band antenna operating at 2.4 GHz, 2.9 GHz, and 5.8 GHz frequency bands, respectively. The results also provided overall good diversity performances with the ECC [removed] 9.98, MEG < 3 dB, and TARC in all of the proposed multi-band MIMO antenna systems at respective frequencies. The reflection & transmission coefficients, surface currents, radiation patterns, total efficiency, and diversity parameters are presented and discussed. Moreover, the proposed integration of CSRR with the antenna for MIMO antenna arrays has the advantage of multi-band operation, size reduction, isolation enhancement, good diversity, and high gain performances. With this, it is possible to conclude that the proposed metamaterial multi-band MIMO antenna is the right candidate for WLAN applications