Effect of wet-grinding steel slag on the properties of Portland cement: An activated method and rheology analysis

Steel slag is a solid waste generated from the steelmaking process. With a very low utilization rate of 30% in China, a high discharging cost of steel slag is inevitable so that it is imperative to dispose of steel slag by new technology. In this study, steel slag was refined by wet-grinding technology to apply on cement. The results showed that the initial setting time and final setting time were prolonged by the increased dosage of 3 mu m steel slag. Although the viscosity of wet-grinding steel slag - cement specimens increased significantly, the shear-thinning phenomenon happened by mechanical mixing. The wet-grinding specimens presented a higher hydration heat than that of raw steel slag specimens, and the microstructure of 3 mu m-40% (3 mu m steel slag mixed with cement as a dosage of 40%) is much denser and show more hydration products than that of raw-40% (raw steel slag mixed with cement as a dosage of 40%) which results in an enhanced compressive strength that could be guaranteed by the dosage of 20% (3 d), 30% (28 d) and 40% (60 d) under the condition of 3 mu m steel slag incorporation with lower autogenous shrinkage. Hemicarboaluminate peak was found in wet-grinding specimens that show a higher calcium sulphoaluminate to calcium. The wet-grinding steel slag CO2 emission and cost showed a downward trend compared with cement.Web of Science286art. no. 12282