Mitigation of Draft Tube Pressure Pulsations by Radial Protrusion of Solid Bodies into the Flow Field: An Experimental Investigation

An experimental investigation of frequential protrusion of four solid rods into the draft tube of a propeller turbine operating under partial discharge has been undertaken. The effectiveness of mitigating the pressure fluctuations associated with the rotating vortex rope (RVR) has been quantified using pressure measurements on the wall of the draft tube cone. Three azimuthal configurations of the phase difference between the rods, and four protrusion lengths were investigated. It is shown that the rotating component of the RVR decreases, irrespective of the azimuthal configuration and protrusion length, with imposed phase differences in the same direction as the runner rotation being the most effective, reducing the amplitude of the rotating component by a maximum of 62%. However, for each azimuthal configuration, the plunging mode of the RVR is amplified for large protrusion lengths, with the smallest amplification occurring for the case of 180 degrees phase difference between protrusions. Therefore, to quantify the most efficient configuration in mitigating the harmful effects of the RVR, an overall assessment of its effects on the entire turbine must be made before a conclusion can be drawn